column
A Theoretical Analysis on Characteristic Parameter of the Planetary Cross Mill and Determination of Its Rolling force
Kang Zuli, Qin Nianzu, Xiang De
1984, 6(S1): 1-10. DOI: 10.13374/j.issn1001-053x.1984.s1.015
Abstract PDF
Calculation and Design for caster angle of Cardan Shaft in Skew Rolling Mill
Hu Zhenghuan, Zhu Chaofu
1984, 6(S1): 11-19. DOI: 10.13374/j.issn1001-053x.1984.s1.016
Abstract PDF
PRACTICAL MEASUREMENT AND CALCULATION TO CONTROL THE STRIP SHAPE IN CONTINOUS COLD ROLLING
Zou Jiaxiang, Huang Huaqing, Kang Guixin, Gao Wenyi, Wu Fuyuan
1984, 6(S1): 20-33. DOI: 10.13374/j.issn1001-053x.1984.s1.017
Abstract PDF
A Study of the Resistance to plastic Deformation of Chrome Steel and Carbon Tool Steel at A High Temperture and rate
Zhou Jihua, Guan Kezhi
1984, 6(S1): 34-44. DOI: 10.13374/j.issn1001-053x.1984.s1.018
Abstract PDF
A Test Reseach on Static Bending Strength of SpheroidalCast Iron Gears
Zhu Xiaolu, Lian Yizhi, Yi Bingyue
1984, 6(S1): 45-54. DOI: 10.13374/j.issn1001-053x.1984.s1.019
Abstract PDF
Test and Reseach about Bending Fatigue Strength of Three Kinds of Baintic Ductile Iron Gears
Fan Minzheng, Lian Yizhi, Liang Ji
1984, 6(S1): 55-64. DOI: 10.13374/j.issn1001-053x.1984.s1.020
Abstract PDF
Research of the Carrying Capacity of Bainitic Ductile Iron Gears
Cao Renzheng, Guan Zhuo
1984, 6(S1): 65-70. DOI: 10.13374/j.issn1001-053x.1984.s1.021
Abstract PDF
A Study on Cutting Forces buring nobbing the Middle Hardness Gears
Zhou Qikun, Ren Meirong, Sun Rongping, Wu Juying, Liu Zhanlong
1984, 6(S1): 71-79. DOI: 10.13374/j.issn1001-053x.1984.s1.022
Abstract PDF
An Investigation into the Fundamental Parameters of Hoist Gear Reducer Series
Wen Yougan, Sheng Hanzhong, Miao Yanbin
1984, 6(S1): 80-88. DOI: 10.13374/j.issn1001-053x.1984.s1.023
Abstract PDF
THE ENVELOPING OF A FAMILY OF Bl-PARAMETRIC SURFACES AND ITS APPLICATION
Ma Xiangfeng, Feng Dekun
1984, 6(S1): 89-94. DOI: 10.13374/j.issn1001-053x.1984.s1.024
Abstract PDF
The Programming and Application of Integer Optimazation（Grid Method ）
Wu Jigeng
1984, 6(S1): 95-105. DOI: 10.13374/j.issn1001-053x.1984.s1.025
Abstract PDF
The Concentraled Stress Principle in the Loadcell Design
Wang Zhizheng
1984, 6(S1): 106-112. DOI: 10.13374/j.issn1001-053x.1984.s1.026
Abstract PDF
Continuous Rolling of Narrow Strip with Planetary mill as Roughing mill
Xu Baosheng
1984, 6(S1): 113-117. DOI: 10.13374/j.issn1001-053x.1984.s1.027
Abstract PDF
A Suggestion With Plane Quadratic Enveloping Worm Transmission for 5-50tf Trolley of Overhead Travelling Crane
Guo Qiyang
1984, 6(S1): 118-124. DOI: 10.13374/j.issn1001-053x.1984.s1.028
Abstract PDF