column
Computer Simulation on Inside State of Blast Furnace
Wang Zhengfu, Yang Tianjun, Ni Xuezi
1994, 16(4): 303-308. DOI: 10.13374/j.issn1001-053x.1994.04.001
Abstract PDF
The System Energy Saving and Its Economic Benefit in Iron and Steel Factory
Xiao Shucheng, Yang Qingmin, Xu Yepeng
1994, 16(4): 309-314,345. DOI: 10.13374/j.issn1001-053x.1994.04.002
Abstract PDF
Calculation and Analysis of Temperature and Stress in Strands for Horizontal Casting of Steel
Fu Junlong, Zhang Fenglu, Zhou Yunqing
1994, 16(4): 315-319. DOI: 10.13374/j.issn1001-053x.1994.04.003
Abstract PDF
Calculation and Experimental Determination of Parameters Related to Extended Grain Boundary
Liu Guoquan
1994, 16(4): 320-324,367. DOI: 10.13374/j.issn1001-053x.1994.04.004
Abstract PDF
The Optimization of Chemical Composition and Heat Treatment Parameters for Silicon-Manganese TRIP Steel
Wang Sigen, Hua Lixian, Wang Xu
1994, 16(4): 325-329. DOI: 10.13374/j.issn1001-053x.1994.04.005
Abstract PDF
The Magnetic Properties of the Explosive Consolidating Amorphous Powder
Qiu Jun, Xie Zizhang, Yang Rang, Shao Binghuang, Liu Zhiyue
1994, 16(4): 330-334. DOI: 10.13374/j.issn1001-053x.1994.04.006
Abstract PDF
An Investigation on Ceramic Lined Steel Pipe
Yin Sheng, Ye Hongyu, Guo Zhimeng, Wang Xu, Lai Heyi
1994, 16(4): 335-339. DOI: 10.13374/j.issn1001-053x.1994.04.007
Abstract PDF
Adaptive Neural Networks for AFC/AGC Complex Control
Zhou Xudong, Li Lianshi, Wang Xianjin, Fu Zuobao
1994, 16(4): 340-345. DOI: 10.13374/j.issn1001-053x.1994.04.008
Abstract PDF
Influential Function Method Model of Axial Force of 4-H Strip Mill under the Condition of Non-Symmetry Rolling—Study on the Axial Mechanical Behavior of 4-H strip mills (Ⅲ)
Gao Yongsheng, Zou Jiaxiang, Zhang Peichen, Zhou Jihua
1994, 16(4): 346-350. DOI: 10.13374/j.issn1001-053x.1994.04.009
Abstract PDF
Mathematical Model of the Flow Stress of Aluminium Alloys
Zhou Jihua, Wang Zaiying, Gao Yongsheng, Lun Yixin
1994, 16(4): 351-356. DOI: 10.13374/j.issn1001-053x.1994.04.010
Abstract PDF
Mechanical Analysis of the Barrel for the Heavy Hydraulic Clay Gun
Liu Jianping, Zang Yong
1994, 16(4): 357-360. DOI: 10.13374/j.issn1001-053x.1994.04.011
Abstract PDF
Non-Equilibrium Segregation of Cu on Surface of Al-1.17%Cu Alloy
Chen Ning, Yu Zongsen
1994, 16(4): 361-363. DOI: 10.13374/j.issn1001-053x.1994.04.012
Abstract PDF
Computer Simulation on Modern High Speed Strip Mills
Mu Zhichun
1994, 16(4): 364-367. DOI: 10.13374/j.issn1001-053x.1994.04.013
Abstract PDF
Fuzzy Hybrid Control and Its Application in Robot Assembly Task
Luo Fei, Yu Datai, Sun Yikang
1994, 16(4): 368-373. DOI: 10.13374/j.issn1001-053x.1994.04.014
Abstract PDF
A Research on Temperature Measurement in Ultraviolet Range
Zhang Jianyong, Cheng Ruixue, Wang Shaochun
1994, 16(4): 374-376. DOI: 10.13374/j.issn1001-053x.1994.04.015
Abstract PDF
Loadamitic Self-adapting Drive for GTR
Hu Jianzhong, Li Chunshou
1994, 16(4): 377-381. DOI: 10.13374/j.issn1001-053x.1994.04.016
Abstract PDF
Software Implementation and Application of Potts-Glass Model Algorithm
Tong Longen
1994, 16(4): 382-386. DOI: 10.13374/j.issn1001-053x.1994.04.017
Abstract PDF
Model of the Hot Strip Mill Coiling Temperature Control System
Liu Ping, Guan Kezhi, Sun Yikang
1994, 16(4): 387-391. DOI: 10.13374/j.issn1001-053x.1994.04.018
Abstract PDF
Extraction and Separation for Large Inclusions in Steel
Sun Chenling
1994, 16(4): 392-395. DOI: 10.13374/j.issn1001-053x.1994.04.019
Abstract PDF
Scott's Isomorphism Theorem and Craig Interpolation Theorem for Lω1ω(Q)
Sun Xiaolan
1994, 16(4): 396-400. DOI: 10.13374/j.issn1001-053x.1994.04.020
Abstract PDF
Effect of Combined Fatigue and Creep under Multiaxial Stress
Wang Lianqing, Wang Jianguo, Tang Junwu
1994, 16(4): 401-404. DOI: 10.13374/j.issn1001-053x.1994.04.021
Abstract PDF