column
Derived Dynamic Disasters of Large Scale Mined-out Area for West Coal Mines
LAI Xingping
2004, 26(1): 1-3. DOI: 10.13374/j.issn1001-053x.2004.01.001
Abstract PDF
Research on an Antifreezing Dust Depressor Used to the Road in Open-pit mines
JIN Longzhe, ZHU Jimao, REN Zhigang, WEI Wei
2004, 26(1): 4-6. DOI: 10.13374/j.issn1001-053x.2004.01.002
Abstract PDF
Flocculating Ability of Mycobacterium Phlei to Hematite and Quartz
YANG Huifen, ZHANG Qiang
2004, 26(1): 7-10. DOI: 10.13374/j.issn1001-053x.2004.01.003
Abstract PDF
Factors Influencing Ammonia Nitrogen Precipitation from Simulated Wastewater
SUN Tichang, ZHANG Jianyun, SONG Quanyuan
2004, 26(1): 11-14. DOI: 10.13374/j.issn1001-053x.2004.01.004
Abstract PDF
Analysis on the Nonlinear Subsidence Survey Results of CFG Pile Composite Foundation of a High-building
LI Zhanghong, QIAO Lan, CAI Meifeng, WANG Guoyan
2004, 26(1): 15-17. DOI: 10.13374/j.issn1001-053x.2004.01.005
Abstract PDF
Isothermal Experiment Research of a High Temperature Granular Bed Filter
LI Xiang, BAI Hao, CANG Daqiang, TAO Baoguo, ZOU Zhan, MU Jianzhong
2004, 26(1): 18-21. DOI: 10.13374/j.issn1001-053x.2004.01.006
Abstract PDF
Formation Mechanism of Fine Bubbles in the Shroud Nozzle of a Ladle
TANG Fuping, LIU Jianhua, BAO Yanping, YANG Tianjun
2004, 26(1): 22-25. DOI: 10.13374/j.issn1001-053x.2004.01.007
Abstract PDF
Experimental Research of Composition Control of CaO-SiO2-Al2O3-MgO Inclusion by Using Low Basic Top Slag for Tire Cord Steel
WANG Lifeng, ZHANG Jiongming, WANG Xinhua, WANG Wanjun
2004, 26(1): 26-29. DOI: 10.13374/j.issn1001-053x.2004.01.008
Abstract PDF
Experimental Study on Coal-based Direct Reduction of Shirengou Ore in Open-fired Atmosphere
FENG Junxiao, LE Kai, WANG Shanghuai
2004, 26(1): 30-33. DOI: 10.13374/j.issn1001-053x.2004.01.009
Abstract PDF
Numerical Calculation of Flow and Heat Transfer in an Outer-Combustion Swirl-Flowing Hot Blast Stove
ZHANG Shuchen, GUO Hongzhi, LIU Xiangjun, CHENG Xiaohu, CAI Zhangping, ZHAO Shuzhi, CHENG Keyou
2004, 26(1): 34-37. DOI: 10.13374/j.issn1001-053x.2004.01.010
Abstract PDF
Physical Model of a Solid Auxiliary Electrode Silicon Sensor
WANG Qingsong
2004, 26(1): 38-41. DOI: 10.13374/j.issn1001-053x.2004.01.011
Abstract PDF
Influencing Factors on Triangular Zone Cracks in a Continuously Cast Slab
ZHU Guosen, WANG Xinhua, YU Huixiang, WANG Wanjun
2004, 26(1): 42-44. DOI: 10.13374/j.issn1001-053x.2004.01.012
Abstract PDF
Infrared Detection and analysis on the Lining Damage of a Continuous Casting Tundish
NIE Xianghui, LI Xiaogang, YANG Tishao, LI Ming, TAN Yi
2004, 26(1): 45-48. DOI: 10.13374/j.issn1001-053x.2004.01.013
Abstract PDF
Large-Scale 3D Model and Quantitative Characterization of Grain Microstrcture Based on Monte Carlo Potts Simulation
QIN Xiangge, LIU Guoquan
2004, 26(1): 49-52,109. DOI: 10.13374/j.issn1001-053x.2004.01.014
Abstract PDF
Analytical Solution of Governing Equations for Three-dimension Steady State Crystal Growth
LIAO Fucheng, ZU Cuie, ZHENG Liancun, WANG Zidong, LI Weidong
2004, 26(1): 53-55. DOI: 10.13374/j.issn1001-053x.2004.01.015
Abstract PDF
Effect of Strain-Induced Transformation on Grain Refinement of SAF2205 during Superplastic Deformation
ZHANG Peixue, REN Xueping, XIE Jianxin, WANG Wei
2004, 26(1): 56-58,114. DOI: 10.13374/j.issn1001-053x.2004.01.016
Abstract PDF
Effect of the Volume Fraction of In-Situ TiC Particles on the Semi-Solid Micro-structure of Spray Formed 7075 Al Alloy
LIU Huimin, HU Nusitu, CUI Hua, YANG Bin, ZHANG Jishan
2004, 26(1): 59-62. DOI: 10.13374/j.issn1001-053x.2004.01.017
Abstract PDF
Preparation and Room-Temperature Fracture Toughness of Mo-Si-B Ternary System Composites
LIU Fengshou, YANG Wangyue, ZHANG Laiqi
2004, 26(1): 63-68. DOI: 10.13374/j.issn1001-053x.2004.01.018
Abstract PDF
Fabrication and Structure of Rapid Solidified Nd-Fe-B Thick Ribbons
HUI Xidong, WANG Jianguo, HAN Ling, KOU Hongchao
2004, 26(1): 69-72. DOI: 10.13374/j.issn1001-053x.2004.01.019
Abstract PDF
Microarc Electrodeposition of Ceramic Coatings on Double Electrodes of AZ91D Magnesium Alloy by AC Pulse Method
LIU Yuangang, ZHANG Wei, LI Jiuqing, SHEN Lei
2004, 26(1): 73-77. DOI: 10.13374/j.issn1001-053x.2004.01.020
Abstract PDF
Influence of Texture on Initial R-value of Deep Drawing 3104 Aluminum Sheet
MA Quancang, MAO Weimin, FENG Huiping
2004, 26(1): 78-81. DOI: 10.13374/j.issn1001-053x.2004.01.021
Abstract PDF
Intelligent Modeling and Control Strategy for the Electrode System in Ladle Furnance
ZHANG Shaode
2004, 26(1): 82-85. DOI: 10.13374/j.issn1001-053x.2004.01.022
Abstract PDF
Machining Features Sequencing of Cross Wedge Rolling Tools
YANG Hongqing, WANG Baoyu, YANG Cuiping, HU Zhenghuan
2004, 26(1): 86-90. DOI: 10.13374/j.issn1001-053x.2004.01.023
Abstract PDF
Shape Control Performance of 1 800 mm Virtual Mills
HE Anrui, ZHANG Qingdong, XU Jianyong, JIANG Zhenglian, WANG Chen
2004, 26(1): 91-94. DOI: 10.13374/j.issn1001-053x.2004.01.024
Abstract PDF
Simulation of the Electromagnetic Field in Steel Slabs Based on the Finite Element Method
LI Guang, LI Huade
2004, 26(1): 95-98. DOI: 10.13374/j.issn1001-053x.2004.01.025
Abstract PDF
Control of FGC System Based on Multi-model Adaptive Control Method
WANG Xiuyan, GE Ping, SUN Yikang, WANG Hongxi
2004, 26(1): 99-102. DOI: 10.13374/j.issn1001-053x.2004.01.026
Abstract PDF
Modeling and Application Based on Diagonal Recurrent Neural Network
DUAN Huida, ZHENG Deling, LIU Cong
2004, 26(1): 103-105. DOI: 10.13374/j.issn1001-053x.2004.01.027
Abstract PDF
Numerical Simulation and Manufacture of a Grid Frequency Synchronized Machine Drive Control System
JIE Lun, LU Yifang, WANG Zhiliang, XUE Weimin, SUN Yikang
2004, 26(1): 106-109. DOI: 10.13374/j.issn1001-053x.2004.01.028
Abstract PDF
Experimental Study on Operating Parameters of a Special Miniature PSA Oxygen Concentrator for SARS Patients
LIU Yingshu, CUI Hongshe, LE Kai, ZHANG Dexin, ZHAO Zhi
2004, 26(1): 110-114. DOI: 10.13374/j.issn1001-053x.2004.01.029
Abstract PDF