column
Research on optimal spacing of plane charge
GAO Yintong, QIAN Dayi, GONG Min, SHI Jianjun
2005, 27(2): 129-131. DOI: 10.13374/j.issn1001-053x.2005.02.033
Abstract PDF
Slope reinforcement and stability analysis in Shuichang mine of China
LI Zhanghong, WEN Jun, CAI Meifeng, LI Juncai, TAN Zhuoying
2005, 27(2): 132-136. DOI: 10.13374/j.issn1001-053x.2005.02.034
Abstract PDF
Analysis of cutting slope reinforcement in swelling rock and soil
WU Shunchuan, ZHANG Youpa, GAO Yongtao
2005, 27(2): 137-141,155. DOI: 10.13374/j.issn1001-053x.2005.02.035
Abstract PDF
Stress and deformation analysis of freeway deep cutting slope by finite element method
QIAO Lan, LIU Baoxu, LI Zhanghong
2005, 27(2): 142-145. DOI: 10.13374/j.issn1001-053x.2005.02.036
Abstract PDF
Evaluation method of engineering construction stability for expressway tunnels based on dynamic classification of wall rock
LIU Baoxu, QIAO Lan, LI Zhanghong
2005, 27(2): 146-149. DOI: 10.13374/j.issn1001-053x.2005.02.037
Abstract PDF
Strength behaviour of unsaturated compacted silt with high-saturated degree under controlled suction conditions
LI Zhanqiang, YANG Weimin, ZHAO Changzhou
2005, 27(2): 150-155. DOI: 10.13374/j.issn1001-053x.2005.02.038
Abstract PDF
Growth conditions of photosynthetic bacteria
QIAN Dayi, ZHU Yidan, SONG Cunyi, PAN Jiantong
2005, 27(2): 156-158. DOI: 10.13374/j.issn1001-053x.2005.02.039
Abstract PDF
Combustion behaviour of chip-shaped particles in a circulating fluidized bed boiler(Ⅰ): Discription of particle morphology and characteristics of fluidization quality
LIU Boqian, GUO Yong, ZHAO Yumin, WANG Jinxin, QI Feng
2005, 27(2): 159-163. DOI: 10.13374/j.issn1001-053x.2005.02.040
Abstract PDF
Theoretical and experimental study on ignition of pulverized coal by high temperature air in power plants
LI Dong, WANG Heng, ZHAO Lihe, FENG Wujun, CHEN Yan
2005, 27(2): 164-168. DOI: 10.13374/j.issn1001-053x.2005.02.041
Abstract PDF
Self-intensity of binding phase in iron ores during sintering
WU Shengli, DU Jianxin, MA Hongbin, ZHANG Zuocheng, CHEN Hui
2005, 27(2): 169-172. DOI: 10.13374/j.issn1001-053x.2005.02.042
Abstract PDF
Numerical simulation of thermal processing in continuously cast beam blank
LOU Juanjuan, BAO Yanping, LIU Jianhua, SUN Wei, DU Songlin, HUANG Sheqing
2005, 27(2): 173-177. DOI: 10.13374/j.issn1001-053x.2005.02.043
Abstract PDF
Pearlite effect on dynamic recrystallization of ferrite in low carbon steels
LI Longfei, YANG Wangyue, SUN Zuqing
2005, 27(2): 178-182. DOI: 10.13374/j.issn1001-053x.2005.02.044
Abstract PDF
Dynamical microstructure evolution of Q235 low carbon steel during high temperature deformation
ZHANG Maicang, DONG Jianxin, CENG Yanping, SUN Ying, YANG Zhongmin
2005, 27(2): 183-186,196. DOI: 10.13374/j.issn1001-053x.2005.02.045
Abstract PDF
Analysis on behavior of dynamic recrystallization in magnesium alloy AZ31 by orientation mapping
MENG Li, YANG Ping, CUI Fenge, ZHAO Zude
2005, 27(2): 187-192. DOI: 10.13374/j.issn1001-053x.2005.02.046
Abstract PDF
Effect of derect pulse modification process on solidification structure of Sn-15%Pb Alloy
WANG Jingsong, XUE Qingguo, SHI Xiangdong, FAN Fangguo, XU Jianguo, CANG Daqiang
2005, 27(2): 193-196. DOI: 10.13374/j.issn1001-053x.2005.02.047
Abstract PDF
Calculation of Nb segregation behavior in liquid phase for Nb-rich superalloys
DONG Jianxin, ZHANG Maicang, CENG Yanping
2005, 27(2): 197-201. DOI: 10.13374/j.issn1001-053x.2005.02.048
Abstract PDF
Behavior of inclusions in nickel-base P/M superalloy under tensile load
CENG Yanping, DONG Jianxin, ZHANG Maicang, ZHANG Lina, XIE Xishan
2005, 27(2): 202-204. DOI: 10.13374/j.issn1001-053x.2005.02.049
Abstract PDF
Deposition technology and properties of chromium oxide coatings by RF reactive sputtering
XIONG Xiaotao, YAN Liangchen, YANG Huisheng, WANG Yanbin
2005, 27(2): 205-208,212. DOI: 10.13374/j.issn1001-053x.2005.02.050
Abstract PDF
Manufacture and properties of 8 YSZ electrolyte thin film by tape casting
HAN Minfang, WANG Yuqian, LI Botao, PENG Suping
2005, 27(2): 209-212. DOI: 10.13374/j.issn1001-053x.2005.02.051
Abstract PDF
Painting of magnesium alloys based on microarc electrodeposition
LIU Yuangang, ZHANG Wei, GAO Jin, TU Yunhua, LI Jiuqing
2005, 27(2): 213-217. DOI: 10.13374/j.issn1001-053x.2005.02.052
Abstract PDF
Toughening of epoxy resin by liquid butadiene-acrylonitrile rubber and nano-SiO2 powder
XIAO Jiumei, CHEN Zhanghua, GONG Chunxiu, MA Wenjiang, XU Fengguang
2005, 27(2): 218-221. DOI: 10.13374/j.issn1001-053x.2005.02.053
Abstract PDF
Analysis of process parameter influence on deformation mechanism in multi-wedge cross wedge rolling
SHU Xuedao, XING Xidong, HU Zhenghuan
2005, 27(2): 222-226. DOI: 10.13374/j.issn1001-053x.2005.02.054
Abstract PDF
Mechanical properties and strengthening mechanism of high-strength low-carbon automobile steel plates produced by CSP technology
ZHAO Zhengzhi, KANG Yonglin, YU Hao, GU Hairong
2005, 27(2): 227-231. DOI: 10.13374/j.issn1001-053x.2005.02.055
Abstract PDF
Coordinated control of flatness and surface roughness of strip on 2030 mm cold tandem mills
ZHANG Qingdong, WANG Wenguang, WU Yue, WANG Hui
2005, 27(2): 232-234. DOI: 10.13374/j.issn1001-053x.2005.02.056
Abstract PDF
Control strategy for ladle running
LIU Qing, ZHAO Ping, WU Xiaodong, TIAN Naiyuan
2005, 27(2): 235-239,249. DOI: 10.13374/j.issn1001-053x.2005.02.057
Abstract PDF
Continuous casting and rolling process scheduling system of two-strand thin slabs based on hybrid genetic algorithm
HE Dongfeng, TIAN Naiyuan
2005, 27(2): 240-244. DOI: 10.13374/j.issn1001-053x.2005.02.058
Abstract PDF
Artificial immune algorithm based on biological immune clone selection and immune network theory
WEI Yaoguang, ZHENG Deling, FU Dongmei, ZHOU Ying
2005, 27(2): 245-249. DOI: 10.13374/j.issn1001-053x.2005.02.059
Abstract PDF
Distance measurement with an ultrasonic ranging system based on continuous wave narrow bandwidth frequency modulation
LI Xisheng, WU Bingzhen, YOU Jia, SHU Xiongying
2005, 27(2): 250-252. DOI: 10.13374/j.issn1001-053x.2005.02.060
Abstract PDF
Main circuit and its current control algorithm of a line-frequency synchronous induction motor drive system
XIE Lun, LU Yifang, XUE Weimin, WANG Zhiliang, SUN Yikang
2005, 27(2): 253-256. DOI: 10.13374/j.issn1001-053x.2005.02.061
Abstract PDF