column
Partition of spontaneous combustion dangerous zone and prediction of spontaneous combustion based on numerically modeling the flow field at fully mechanized caving face
ZHANG Xinhai, XI Guang, XU Jingcai, ZHOU Jinsheng, ZHANG Jian
2005, 27(6): 641-644. DOI: 10.13374/j.issn1001-053x.2005.06.001
Abstract PDF
Dynamic photoelastic research and engineering application of chamber blasting at different cavity ratios
GONG Min, CHEN Xiangdong
2005, 27(6): 645-648. DOI: 10.13374/j.issn1001-053x.2005.06.002
Abstract PDF
Selection of ecotype dust suppressive factors for simple roadway in open pits
TAN Zhuoying, LIU Wenjing, ZHAO Xingguang, CAI Meifeng
2005, 27(6): 649-654. DOI: 10.13374/j.issn1001-053x.2005.06.003
Abstract PDF
Application of prestressed anchors and grouting with bar nets in reinforcement of reinforced soil retaining walls
LI Shibo, GAO Yongtao, HUANG Zhian
2005, 27(6): 655-658. DOI: 10.13374/j.issn1001-053x.2005.06.004
Abstract PDF
Investigation of dynamic consolidation effect on Collapse loess roadbed
QIAO Lan, DING Yuhui, YU Deshui
2005, 27(6): 659-661. DOI: 10.13374/j.issn1001-053x.2005.06.005
Abstract PDF
Anode plasma electrolysis for degradation of phenol in high salt aqueous solution
HAN Wei, HE Yedong
2005, 27(6): 662-665. DOI: 10.13374/j.issn1001-053x.2005.06.006
Abstract PDF
Improvement of CSP castability in low carbon Al-killed steel
WEI Jun, YAN Guoan, TIAN Zhihong, HUANG Donghua, CAI Kaike
2005, 27(6): 666-670. DOI: 10.13374/j.issn1001-053x.2005.06.007
Abstract PDF
Analysis on the surface temperature of a beam blank
LIU Jianhua, BAO Yanping, CHEN Gaoxing, DU Songlin, SUN Wei, HUANG Sheqing
2005, 27(6): 671-674. DOI: 10.13374/j.issn1001-053x.2005.06.008
Abstract PDF
Valence electron structure of γ-Fe unit-cell bearing alloy atoms and its influence on phase transformation of the alloy structural steel
SONG Yuepeng, LIU Guoquan, LI Zhilin, LIU Jiantao, FENG Chengming
2005, 27(6): 675-678. DOI: 10.13374/j.issn1001-053x.2005.06.009
Abstract PDF
Precipitation behavior of Ti(C,N) in CSP low carbon steel with small amount of Ti addition
BO Mingzhuo, LIU Delu, LOU Yanzhi
2005, 27(6): 679-683. DOI: 10.13374/j.issn1001-053x.2005.06.010
Abstract PDF
Numerical simulation and magnetic characteristic of typical ferromagnetic components in loading state
REN Jilin, LI Xiaogang, SONG Kai, TANG Jihong, MA Hongwei
2005, 27(6): 684-687. DOI: 10.13374/j.issn1001-053x.2005.06.011
Abstract PDF
Microstructure and mechanical properties of TRIP steel by TSCR process
ZHANG Yinghui, KANG Yonglin, YU Hao, LIU Xiao, FANG Yuan
2005, 27(6): 688-691. DOI: 10.13374/j.issn1001-053x.2005.06.012
Abstract PDF
Preparation of stainless steel powder containing nitrogen by mechanical alloying technique
GUAN Lu, QU Xuanhui, JIA Chengchang, WANG Shizhong
2005, 27(6): 692-694. DOI: 10.13374/j.issn1001-053x.2005.06.013
Abstract PDF
Preparation and property of oxygen permeation membranes Ca0.5Sr0.5CoxFe1-xO3-δ
CHEN Chaoqun, YAN Bojun, FENG Gensheng, ZHANG Ying, XU Danniang, LI Liansheng
2005, 27(6): 695-697. DOI: 10.13374/j.issn1001-053x.2005.06.014
Abstract PDF
Preparation of doped TiO2 thin films by photodeposition method
LI Bin, YUAN Zhangfu, XU Cong, GUAN Lu, FAN Xianguo, GONG Jiazhu
2005, 27(6): 698-701. DOI: 10.13374/j.issn1001-053x.2005.06.015
Abstract PDF
Electrochemical deposited polyaniline on a carbon fiber electrode in sulfuric acid electrolyte
MENG Xu, WU Kezhong, WANG Xindong, GUO Min
2005, 27(6): 702-705. DOI: 10.13374/j.issn1001-053x.2005.06.016
Abstract PDF
Continuous core-filling cast equipment for the bimetal composite materials of copper cladding aluminum
XUE Zhiyong, QIN Yanqing, WU Chunjing
2005, 27(6): 706-709. DOI: 10.13374/j.issn1001-053x.2005.06.017
Abstract PDF
Numerical simulation on thermal process in an Si_3N_4-reaction furnace with CFX
CHEN Jin, YANG Jing, YIN Shaowu, WANG Li
2005, 27(6): 710-715. DOI: 10.13374/j.issn1001-053x.2005.06.018
Abstract PDF
Nonlinear singular boundary value problems arising in the boundary layer of fluid flowing on a conveyor belt
SU Xiaohong, ZHENG Liancun, ZHANG Xinxin
2005, 27(6): 716-719. DOI: 10.13374/j.issn1001-053x.2005.06.019
Abstract PDF
Optimum analysis on steering rod mechanism of an mine truck based on robust design
SHEN Yanhua, ZHANG Wenming, FAN Bailin
2005, 27(6): 720-723. DOI: 10.13374/j.issn1001-053x.2005.06.020
Abstract PDF
Wireless energy transmission technology and its application in a torque monitoring system
ZHANG Xuesong, ZHU Chaofu, ZHANG Chunfa, LI Zhongfu
2005, 27(6): 724-727. DOI: 10.13374/j.issn1001-053x.2005.06.021
Abstract PDF
Application of multi-resolution wavelet controller in roll eccentricity control
WANG Weiren, WANG Zhenglin, SUN Yikang
2005, 27(6): 728-731. DOI: 10.13374/j.issn1001-053x.2005.06.022
Abstract PDF
Classification of surface defects for Cold rolled strips based on LVQ neural network
WU Guifang, XU Ke, XU Jinwu
2005, 27(6): 732-735. DOI: 10.13374/j.issn1001-053x.2005.06.023
Abstract PDF
Production mode optimization of a steelmaking workshop system
LIU Qing, HUANG Xingwu, FU Pingyuan
2005, 27(6): 736-739,763. DOI: 10.13374/j.issn1001-053x.2005.06.024
Abstract PDF
Relative superiority research on the ironmaking/steelmaking interface of the typical process section
QIU Jian, TIAN Naiyuan
2005, 27(6): 740-744,768. DOI: 10.13374/j.issn1001-053x.2005.06.025
Abstract PDF
Application of real options in hi-tech strategic investment project evaluation
MA Xin, DING Huiping
2005, 27(6): 745-749. DOI: 10.13374/j.issn1001-053x.2005.06.026
Abstract PDF
Image nonlinear filter based on CNN-PDE
JU Lei, ZHENG Deling, ZHANG Lei
2005, 27(6): 750-753. DOI: 10.13374/j.issn1001-053x.2005.06.027
Abstract PDF
Non-symmetric digital image encryption scheme based on a generalized chaos synchronization system
ZHANG Xiaohong, MIN Lequan
2005, 27(6): 754-759. DOI: 10.13374/j.issn1001-053x.2005.06.028
Abstract PDF
Discretization algorithm based on super-cube and information entropy
E Xu, GAO Xuedong, TAN Wendong, WANG Ying
2005, 27(6): 760-763. DOI: 10.13374/j.issn1001-053x.2005.06.029
Abstract PDF
Solution for the singular integral equation with Hilbert Kernel based on wavelet
CUI Limin, WANG Yilong, LIAO Fucheng, FENG Xiangchu, TANG Yuanyan
2005, 27(6): 764-768. DOI: 10.13374/j.issn1001-053x.2005.06.030
Abstract PDF