column
Complicated controllable displacement of equivalent filtrational resistance with several slugs
SONG Hong-qing, ZHU Wei-yao, WANG Ming, SUN Yu-kai, HAN Xiu-ting
2009, 31(10): 1213-1217,1321. DOI: 10.13374/j.issn1001-053x.2009.10.009
Abstract PDF
Relationship between capacity spectra and lateral load patterns
WANG Shu-he, HAO You-you, GAO Yin-li, SONG Bo
2009, 31(10): 1218-1223. DOI: 10.13374/j.issn1001-053x.2009.10.019
Abstract PDF
Leaching of nickel-molybdenum sulfide ores with Metallosphaera sedula
CHEN Jia-wu, GAO Cong-jie, ZHANG Qi-xiu, XIAO Lian-sheng, ZHANG Gui-qing
2009, 31(10): 1224-1230. DOI: 10.13374/j.issn1001-053x.2009.10.015
Abstract PDF
Recovery of lead and copper from cyanide tailings
LI Zheng-yao, WANG Li, YU Yan-hong, WEI Peng-cheng
2009, 31(10): 1231-1234. DOI: 10.13374/j.issn1001-053x.2009.10.016
Abstract PDF
Purification of liquid steel with fine heterophases induced by explosive reaction in RH ladles
TANG Fu-ping, LI Zhen, WANG Xiao-feng, LIU Wan-shan, WEN Li-shi
2009, 31(10): 1235-1238. DOI: 10.13374/j.issn1001-053x.2009.10.010
Abstract PDF
Characterization of rust layers formed on Q235 steel exposed to atmosphere in Xisha islands
HAO Xian-chao, LI Xiao-gang, XIAO Kui, DONG Chao-fang
2009, 31(10): 1239-1244. DOI: 10.13374/j.issn1001-053x.2009.10.011
Abstract PDF
Microstructure and fracture mechanism of 1000 MPa hot dip galvanized dual phase steel
JIN Guang-can, ZHAO Zheng-zhi, XU Gang, ZHAO Ai-min, LIU Guang-ming
2009, 31(10): 1245-1249. DOI: 10.13374/j.issn1001-053x.2009.10.018
Abstract PDF
Corrosion mechanisms of a new-type high-manganese austenitic alloy in a molten zinc bath
ZHANG Yi, LIU Jun-you, TIAN Guang-xin, LI Wei, LIU Jie
2009, 31(10): 1250-1256. DOI: 10.13374/j.issn1001-053x.2009.10.012
Abstract PDF
Effect of Nb microalloying on the microstructure and mechanical properties of high-Al cold-rolled TRIP steel
XU Kun, LIU Guo-quan
2009, 31(10): 1257-1262. DOI: 10.13374/j.issn1001-053x.2009.10.013
Abstract PDF
Scaling and electrochemical corrosion behavior of 304 stainless steel pipes in a simulated geothermal water environment
WU Kun-hu, LI Wei-ping, LIU Hui-cong, ZHU Li-qun
2009, 31(10): 1263-1269. DOI: 10.13374/j.issn1001-053x.2009.10.014
Abstract PDF
Characterization of 316 L stainless steel powders produced by supersonic gas atomization
ZHAO Xin-ming, XU Jun, ZHU Xue-xin, ZHANG Shao-ming, ZHU Pan-xing
2009, 31(10): 1270-1276. DOI: 10.13374/j.issn1001-053x.2009.10.017
Abstract PDF
Microstructure of insulating coatings and their influence on the iron loss of oriented silicon steel
HU Shou-tian, KONG Xiang-hua, LI Ping-he, ZHAO Qi-bo, YANG Hao, WANG Xiang-xin, HE Ye-dong
2009, 31(10): 1277-1280. DOI: 10.13374/j.issn1001-053x.2009.10.003
Abstract PDF
Effect of boron and chromium on magnetostriction and mechanical properties of polycrystalline Fe83Ga17 alloy
LI Ji-heng, GAO Xue-xu, ZHU Jie, LI Jie, ZHANG Mao-cai
2009, 31(10): 1281-1285. DOI: 10.13374/j.issn1001-053x.2009.10.004
Abstract PDF
Effect of retrogression heating rate on the microstructure and corrosion resistance of aluminum alloy 7050
LI Guo-feng, ZHANG Xin-ming, LI Peng-hui, YOU Jiang-hai
2009, 31(10): 1286-1291. DOI: 10.13374/j.issn1001-053x.2009.10.005
Abstract PDF
Effects of sectional form and configuration on the conductivity of copper cladding aluminum bars with a rectangle section
LUO Yi-bing, LIU Xin-hua, XIE Jian-xin
2009, 31(10): 1292-1297. DOI: 10.13374/j.issn1001-053x.2009.10.021
Abstract PDF
Numerical simulation of the stand in load-reduction sintering process
ZUO Hai-bin, LIU Zheng-jian, ZHANG Xu, YANG Tian-jun, JIANG Hai-bing
2009, 31(10): 1298-1304. DOI: 10.13374/j.issn1001-053x.2009.10.006
Abstract PDF
Numerical simulation of electromagnetic field in semi-solid slurry preparation by A-EMS
CHEN Xing-run, ZHANG Zhi-feng, XU Jun, SHI Li-kai
2009, 31(10): 1305-1310. DOI: 10.13374/j.issn1001-053x.2009.10.007
Abstract PDF
Numerical modeling of medium induction heating in spiral fin tube rolling
GAO Yu-feng, BAI Hao, CANG Da-qiang, SHE Jing-peng, LI Li-hong
2009, 31(10): 1311-1315. DOI: 10.13374/j.issn1001-053x.2009.10.008
Abstract PDF
Development and optimization of the dynamic soft reduction model
XIE Zhang-chuan, ZHANG Jiong-ming, WANG Xin-hua
2009, 31(10): 1316-1321. DOI: 10.13374/j.issn1001-053x.2009.10.001
Abstract PDF
Intelligent control model of secondary cooling in continuous slab casting
GAO Feng-xiang, WANG Zhang-song, XU Ke, WU Xiu-yong
2009, 31(10): 1322-1327. DOI: 10.13374/j.issn1001-053x.2009.10.002
Abstract PDF
Mathematical model and analysis of contact heat transfer with radiation
DOU Rui-feng, WEN Zhi, SU Fu-yong, LIU Xun-liang, LOU Guo-feng
2009, 31(10): 1328-1333. DOI: 10.13374/j.issn1001-053x.2009.10.020
Abstract PDF
Robust control for a combined shape and gauge multivariable system in hot strip rolling
JING Peng, TONG Chao-nan, LI Jiang-yun, XIAO Lei
2009, 31(10): 1334-1341. DOI: 10.13374/j.issn1001-053x.2009.10.023
Abstract PDF
Plate surface defect recognition method based on wavelet moment invariant and locality preserving projection
WU Xiu-yong, XU Ke, XU Jin-wu
2009, 31(10): 1342-1346. DOI: 10.13374/j.issn1001-053x.2009.10.022
Abstract PDF
Single machine scheduling problem with family setup times
LIU Zhen-gang, WANG Dao-ping, JIN Feng
2009, 31(10): 1347-1350. DOI: 10.13374/j.issn1001-053x.2009.10.024
Abstract PDF