column
Application of the Morgenstern-Price scheme based on the Hoek-Brown criterion to slope stability analysis
QIAO Lan, DING Xin-qi, QU Chun-lai, LI Yuan
2010, 32(4): 409-412,437. DOI: 10.13374/j.issn1001-053x.2010.04.023
Abstract PDF
Effect of pre-oxidation on Panzhihua ilmenite in solid state reduction process
GUO Yu-feng, LÜ Ya-nan, JIANG Tao, QIU Guan-zhou
2010, 32(4): 413-419. DOI: 10.13374/j.issn1001-053x.2010.04.001
Abstract PDF
Industrial heap bioleaching of arsenic-bearing low-grade copper sulfide ore
WEN Jian-kang, YAO Guo-cheng, WU Ming-lin, RUAN Ren-man, CHEN Jing-he, ZOU Lai-chang
2010, 32(4): 420-424. DOI: 10.13374/j.issn1001-053x.2010.04.002
Abstract PDF
Inclusions removal in a tundish with argon purging
FENG Wen-xiang, CHEN Wei-qing, ZHAO Ji-zeng
2010, 32(4): 425-431. DOI: 10.13374/j.issn1001-053x.2010.04.003
Abstract PDF
Control and prediction of total oxygen in IF steel
WANG Min, BAO Yan-ping, CUI Heng, WU Wei-shuang, WU Hua-jie
2010, 32(4): 432-437. DOI: 10.13374/j.issn1001-053x.2010.04.004
Abstract PDF
TEM observation of TiC precipitates nucleated on Ti_2CS and determination of orientation relationships
LOU Yan-zhi, LI Chun-zhi, LIU De-lu
2010, 32(4): 438-443. DOI: 10.13374/j.issn1001-053x.2010.04.005
Abstract PDF
Static recrystallization behavior and technological improvement of X80 pipeline steel with heavy thickness produced by hot continuous rolling
LIU Wen-bin, KANG Yong-lin, NIU Tao, LI Bin
2010, 32(4): 444-449. DOI: 10.13374/j.issn1001-053x.2010.04.006
Abstract PDF
Effect of finish rolling temperature and final cooling temperature on the yield ratio of X65/X70 pipeline plates
WANG Feng-qin, JIE Jia-ying, LI Jia-ding, ZHU Qi-jian
2010, 32(4): 450-454,460. DOI: 10.13374/j.issn1001-053x.2010.04.007
Abstract PDF
Texture and corrosion resistance in hot-dip galvanized steel sheet coatings
SHI Shao-guang, CHEN Leng, ZHANG Qing-hui
2010, 32(4): 455-460. DOI: 10.13374/j.issn1001-053x.2010.04.008
Abstract PDF
Intergranular corrosion and pitting corrosion resistances of Ni-Cr-Mo-Cu-Mx alloys
YANG Rui-cheng, NIU Shao-rui, LI Zhi, JIN Sai-te
2010, 32(4): 461-465. DOI: 10.13374/j.issn1001-053x.2010.04.009
Abstract PDF
Influence of Cl- on the stability of surface films on the β phase model alloy of magnesium-aluminum alloys
JIA Rui-ling, WU Cheng-bin, YAN Chuan-wei, WANG Fu-hui
2010, 32(4): 466-471. DOI: 10.13374/j.issn1001-053x.2010.04.010
Abstract PDF
Microstructure and tensile properties of Ti-44Al-5V-1Cr-0.3Ni-0.1Hf-0.15Gd alloy
JING Yong-juan, CHANG Xia, ZHANG Ji
2010, 32(4): 472-476. DOI: 10.13374/j.issn1001-053x.2010.04.011
Abstract PDF
Synthesis of Ni-P nanopowders via pulse discharging in aqueous solution
CAO Yu-qi, YU Hong-ying, ZHAO Hai-jun, MENG Hui-min, SUN Dong-bo
2010, 32(4): 477-483. DOI: 10.13374/j.issn1001-053x.2010.04.012
Abstract PDF
Preparation of ultrafine Mg powders with evaporation and condensation method
CUI Sheng, GAO Zhi-qiang, SHEN Xiao-dong, LIN Ben-lan
2010, 32(4): 484-487. DOI: 10.13374/j.issn1001-053x.2010.04.021
Abstract PDF
Effect of substrate pretreatments on the growth of SnO_2 nanowire arrays by hydrothermal method
WANG Ya-li, GUO Min, ZHANG Mei, PENG Ben, WANG Xi-dong
2010, 32(4): 488-493. DOI: 10.13374/j.issn1001-053x.2010.04.013
Abstract PDF
Electrodeposition of polyaniline nanowires and their electrochemical properties
NIE Jing-tao, GUO Min, ZHANG Mei, DIAO Peng
2010, 32(4): 494-498. DOI: 10.13374/j.issn1001-053x.2010.04.014
Abstract PDF
Preparation of porous cordierite from coal gangue and abandoned refractory materials
PENG Ben, YUE Chang-sheng, GONG Xia-wei, GUO Min, ZHANG Mei
2010, 32(4): 499-503. DOI: 10.13374/j.issn1001-053x.2010.04.015
Abstract PDF
Mechanochemical activation of iron ore tailings and preparation of high-strength construction materials
ZHENG Yong-chao, NI Wen, XU Li, LI De-zhong, YANG Jing-hua
2010, 32(4): 504-508. DOI: 10.13374/j.issn1001-053x.2010.04.016
Abstract PDF
Furnace body heat load of TISCO 4350 m3 blast furnace
YAN Kui-hong, ZHANG Jian-liang, QI Cheng-lin, ZUO Hai-bin, LIU Wen-wen
2010, 32(4): 509-514. DOI: 10.13374/j.issn1001-053x.2010.04.017
Abstract PDF
FES width spread model and its optimization for a rough rolling mill
WANG Ai-li, YANG Quan, HE An-rui, LIU Hua-qiang
2010, 32(4): 515-519. DOI: 10.13374/j.issn1001-053x.2010.04.018
Abstract PDF
Shaping curve of the right-angle step for a cross wedge rolling elliptical shaft
HU Fa-guo, WANG Bao-yu, HU Zheng-huan
2010, 32(4): 520-524. DOI: 10.13374/j.issn1001-053x.2010.04.019
Abstract PDF
Thermomechanical coupled numerical simulation on cross wedge rolling of hollow shaft parts with equal inner diameter
DING Wei, YANG Cui-ping, ZHANG Kang-sheng, HU Zheng-huan
2010, 32(4): 525-529. DOI: 10.13374/j.issn1001-053x.2010.04.020
Abstract PDF
Partially occluded ear recognition based on local features
YUAN Li, MU Zhi-chun, CENG Hui
2010, 32(4): 530-535. DOI: 10.13374/j.issn1001-053x.2010.04.024
Abstract PDF
Mechanism and application of impact compaction in foundation stabilization of hydraulic reclaimed silty fine sand ground
LI Ting-gang
2010, 32(4): 536-542. DOI: 10.13374/j.issn1001-053x.2010.04.022
Abstract PDF