column
Numerical simulation of the change process of field variables distribution in goaf caused by air reversing in working faces
LI Zong-xiang, JIA Jin-zhang, ZHOU Zhi-lin
2010, 32(6): 691-696,718. DOI: 10.13374/j.issn1001-053x.2010.06.001
Abstract PDF
Arch structure of bolt forepoling in surrounding fractured rock
ZHOU Qiao, GAO Qian
2010, 32(6): 697-701. DOI: 10.13374/j.issn1001-053x.2010.06.002
Abstract PDF
Rule and mechanism of flocculation sedimentation of unclassified tailings
JIAO Hua-zhe, WANG Hong-jiang, WU Ai-xiang, JI Xue-wen, YAN Qing-wen, LI Xiang
2010, 32(6): 702-707. DOI: 10.13374/j.issn1001-053x.2010.06.003
Abstract PDF
Recovery of iron and nickel from nickel laterite ore by direct reduction roasting and magnetic separation
CAO Zhi-cheng, SUN Ti-chang, YANG Hui-fen, WANG Jing-jing, WU Xiao-dan
2010, 32(6): 708-712. DOI: 10.13374/j.issn1001-053x.2010.06.004
Abstract PDF
Magnetizing roasting-magnetic separation of limonite ores from Anhui Provice in east China
ZHU De-qing, ZHAO Qiang, QIU Guan-zhou, PAN Jian, WANG Ze-qun, PAN Chang-jia
2010, 32(6): 713-718. DOI: 10.13374/j.issn1001-053x.2010.06.005
Abstract PDF
Optimization of ore blending during sintering based on complementation of high temperature properties
WU Sheng-li, DAI Yu-ming, Dauter Oliveira, PEI Yuan-dong, XU Jian, HAN Hong-liang
2010, 32(6): 719-724. DOI: 10.13374/j.issn1001-053x.2010.06.006
Abstract PDF
Viscosity characteristic of mold fluxes for TRIP steel containing Al
WANG Huan, TANG Ping, WEN Guang-hua, YU Xiong
2010, 32(6): 725-729. DOI: 10.13374/j.issn1001-053x.2010.06.007
Abstract PDF
Deformability control of Al2O3-SiO2-MgO-CaO-MnO system inclusions in high carbon hard wire 82B steel
CHAI Guo-qiang, WANG Fu-ming, FU Jun, LI Zhang-rong
2010, 32(6): 730-734. DOI: 10.13374/j.issn1001-053x.2010.06.018
Abstract PDF
Hot deformability of oxide-sulfide duplex inclusions in calcium-treated gear steels
XIAO Guo-hua, DONG Han, WANG Mao-qiu, HUI Wei-jun
2010, 32(6): 735-738. DOI: 10.13374/j.issn1001-053x.2010.06.008
Abstract PDF
Influence of cellular automata step length on simulation results of grain growth
WU Lei, LIU Ya-zheng, CHENG Xiao-jie, ZHOU Le-yu, SUN You-bo
2010, 32(6): 739-743. DOI: 10.13374/j.issn1001-053x.2010.06.009
Abstract PDF
x values in secondary phase NbCxN1-x in low carbon steels
QI Hai-quan, YONG Qi-long, YONG Xi, CHEN Ming-xin, ZHANG Zheng-yan
2010, 32(6): 744-747. DOI: 10.13374/j.issn1001-053x.2010.06.019
Abstract PDF
Effect of coiling temperature on the AlN precipitation,microstructure and mechanical properties of low carbon steel
WANG Yan, ZHAO Ai-min, CHEN Yin-li, ZUO Bi-qiang, XUE Jun-ping
2010, 32(6): 748-752,791. DOI: 10.13374/j.issn1001-053x.2010.06.020
Abstract PDF
Annealing processing parameters and microstructure evolution of 780MPa hot dip galvanizing TRIP steel
DING Wei, TANG Di, JIANG Hai-tao, HUANG Wei
2010, 32(6): 753-758. DOI: 10.13374/j.issn1001-053x.2010.06.010
Abstract PDF
Mathematical description of solidification structure evolution under shearing and stirring conditions
ZHU Guang-lei, XU Jun, ZHANG Zhi-feng, LIU Guo-jun, SHI Li-kai
2010, 32(6): 759-763. DOI: 10.13374/j.issn1001-053x.2010.06.011
Abstract PDF
Effects of heat treatment on the microstructure of as-deposited ultrahigh strength aluminium alloys
LI Zhen-liang, HUANG Hai-you, XIE Jian-xin, REN Hui-ping, CHEN Wei, XIN Hai-ying
2010, 32(6): 764-769. DOI: 10.13374/j.issn1001-053x.2010.06.012
Abstract PDF
Microstructural characteristics of the rheo-diecasting AZ91D magnesium alloy
YANG Liu-qing, KANG Yong-lin, ZHANG Fan, DING Rui-hua, LI Jiong
2010, 32(6): 770-776. DOI: 10.13374/j.issn1001-053x.2010.06.013
Abstract PDF
Microstructure and failure analysis of Fe-Ni based alloy rollers produced by plasma cladding
ZHANG Li-min, LIU Jun-bo, SUN Dong-bo, WANG Shu-ming
2010, 32(6): 777-781. DOI: 10.13374/j.issn1001-053x.2010.06.014
Abstract PDF
Effect of hydrogen on the conductivity of PZT-5H ferroelectric ceramics
WU Ming, HUANG Hai-you, CHU Wu-yang, QIAO Li-jie
2010, 32(6): 782-786. DOI: 10.13374/j.issn1001-053x.2010.06.021
Abstract PDF
Effects of temperature and humidity on the performance of hydrogen sensors based on the Nafion membrane
DU Jin-feng, BAI Yang, CHU Wu-yang, QIAO Li-jie
2010, 32(6): 787-791. DOI: 10.13374/j.issn1001-053x.2010.06.022
Abstract PDF
Defect modes of elastic waves in solid-fluid rectangle phononic crystals
LIU Qi-neng
2010, 32(6): 792-796. DOI: 10.13374/j.issn1001-053x.2010.06.015
Abstract PDF
FEM analysis on the metal flow rule of cross wedge rolling cam shafts
HU Fu-sheng, WANG Bao-yu, HU Zheng-huan
2010, 32(6): 797-801. DOI: 10.13374/j.issn1001-053x.2010.06.016
Abstract PDF
Self-learning algorithm optimization for the rolling force model of hot strips
SONG Yong, SU Lan, JING Feng-wei, LIU Wen-zhong
2010, 32(6): 802-806. DOI: 10.13374/j.issn1001-053x.2010.06.017
Abstract PDF
Adaptive sliding mode projective synchronization of chaotic systems with unknown sector input nonlinearity
WANG Jian-an, LIU He-ping
2010, 32(6): 807-811. DOI: 10.13374/j.issn1001-053x.2010.06.023
Abstract PDF
Genetic algorithm with forward-backward scheduling for job-shop problems
WANG Wei-ling, LI Tie-ke, SU Zhi-xiong
2010, 32(6): 812-818. DOI: 10.13374/j.issn1001-053x.2010.06.024
Abstract PDF