column
Simulation experimental investigation on rockburst of dolomite specimens at great depth tunnels
GAO Yong-tao, ZHOU Xing-guo, WU Shun-chuan, HAN Xiao-qiang, WANG Yan-hui
2010, 32(7): 819-826,832. DOI: 10.13374/j.issn1001-053x.2010.07.022
Abstract PDF
Simulation experiments of coal and gas delay outburst in rock cross-cut coal uncovering
YIN Guang-zhi, LI Xiao-quan, JIANG Zhang-bao, LI Gao-shuai, CAI Bo
2010, 32(7): 827-832. DOI: 10.13374/j.issn1001-053x.2010.07.001
Abstract PDF
New grouting material to reinforce coal and eliminate outburst
HUANG Zhi-an, LI Yi-fei, ZHANG Ying-hua, GAO Yu-kun, CHEN Sheng-guo
2010, 32(7): 833-837,871. DOI: 10.13374/j.issn1001-053x.2010.07.002
Abstract PDF
Performance and microstructure of cemented whole-tailings backfilling materials based on red mud,slag and cement
ZHU Li-ping, NI Wen, ZHANG Xu-fang, HUANG Xiao-yan
2010, 32(7): 838-842. DOI: 10.13374/j.issn1001-053x.2010.07.003
Abstract PDF
Similarity transformation of gas blowing rate in physical simulations of continuous casting molds
XU Hai-lun, WEN Guang-hua, TANG Ping
2010, 32(7): 843-848. DOI: 10.13374/j.issn1001-053x.2010.07.004
Abstract PDF
Mechanism of slag entrapment at the overflow weir in tundishes
LIU Jin-gang, HAO Ning, JIANG Zhong-xing, MA Qing-shen
2010, 32(7): 849-854. DOI: 10.13374/j.issn1001-053x.2010.07.005
Abstract PDF
Comparative study on inclusion removal efficiency in molten steel treated by ultrasonic and argon-blowing
SHEN Yong-gang, CHEN Wei-qing, MA Xin-jian
2010, 32(7): 855-859. DOI: 10.13374/j.issn1001-053x.2010.07.019
Abstract PDF
Transformation of non-metal inclusions in ultra-low oxygen wheel steel during refining process
YANG Jun, WANG Xin-hua, WANG Wan-jun, GONG Zhi-xiang, WANG Guo-cai, TANG Yu
2010, 32(7): 860-865,882. DOI: 10.13374/j.issn1001-053x.2010.07.006
Abstract PDF
Investigation of Ti inclusions in tire cord steel
LIU Hong-yu, ZHENG Jian-qiang, LI Yu-hua, LIN Guo-qiang, XUE Zheng-liang, WANG Hong-li
2010, 32(7): 866-871. DOI: 10.13374/j.issn1001-053x.2010.07.020
Abstract PDF
Comparative studies on resistance to pitting corrosion of manganese steels with different deoxidization degrees
CAO Guo-liang, LI Guo-ming, CHEN Shan, CHANG Wan-shun, CHEN Xue-qun
2010, 32(7): 872-876. DOI: 10.13374/j.issn1001-053x.2010.07.007
Abstract PDF
Microstructural evolution of heat-resistant steel Super304H during 650 ℃ long term aging
YU Hong-yao, CHI Cheng-yu, DONG Jian-xin, XIE Xi-shan, CUI Zheng-qiang, CHEN Xiao-fang
2010, 32(7): 877-882. DOI: 10.13374/j.issn1001-053x.2010.07.021
Abstract PDF
Influence of freezing-thawing on atmospheric corrosion of low alloy weathering steels
ZHANG Wen-hua, YANG Shan-wu, GUO Jia, LIU Zhi-yong, HE Xin-lai
2010, 32(7): 883-889. DOI: 10.13374/j.issn1001-053x.2010.07.008
Abstract PDF
Deformation behavior of continuous casting blooms during soft reduction process
LUO Sen, ZHU Miao-yong, JI Cheng, YANG Yue-biao, YANG Ji-lin
2010, 32(7): 890-894. DOI: 10.13374/j.issn1001-053x.2010.07.009
Abstract PDF
Geometric analysis on rotary rolling process of integral helical high finned tubes
ZHANG Lin, HAN Jing-tao, LIU Jing, HAO Feng-tao
2010, 32(7): 895-899. DOI: 10.13374/j.issn1001-053x.2010.07.010
Abstract PDF
Continual preparation of ferronickel by no-contacting smelting reduction
SUN Zhang-yu, GUO Xing-min
2010, 32(7): 900-904. DOI: 10.13374/j.issn1001-053x.2010.07.011
Abstract PDF
Kinetics study on oxidation of iron ore concentrate
SI Xin-guo, LU Xiong-gang, LI Chuan-wei, GUO Shu-qiang, DING Wei-zhong
2010, 32(7): 905-909. DOI: 10.13374/j.issn1001-053x.2010.07.012
Abstract PDF
Structure and properties of long chain branching polypropylene/organomontmorillonite nanocomposites
SU Feng-hua, HUANG Han-xiong
2010, 32(7): 910-914. DOI: 10.13374/j.issn1001-053x.2010.07.013
Abstract PDF
Energy-saving effect and mechanism analysis of high emissivity coatings for BF hot-blast stoves
BAI Hao, WANG Miao, CANG Da-qiang, ZHOU Hui-min
2010, 32(7): 915-921. DOI: 10.13374/j.issn1001-053x.2010.07.014
Abstract PDF
Thermal deformation of HVC work roll in hot strip rolling
WANG Lian-sheng, YANG Quan, HE An-rui, YANG Chun-yan
2010, 32(7): 922-926. DOI: 10.13374/j.issn1001-053x.2010.07.015
Abstract PDF
Fluid-solid interaction characteristics of a novel liquid-conveying 90° elbow structure
WANG Yan-lin, WU Lan-ying, WANG Zi-dong
2010, 32(7): 927-932. DOI: 10.13374/j.issn1001-053x.2010.07.016
Abstract PDF
Operational control of torpedo ladles
HUANG Bang-fu, HE Dong-feng, TIAN Nai-yuan, XU An-jun
2010, 32(7): 933-937. DOI: 10.13374/j.issn1001-053x.2010.07.017
Abstract PDF
Modeling of steelmaking continue-casting manufacturing flow using colored Petri nets and solution of optimized scheduling
WANG Hong-bing, XU An-jun, YAO Lin, TIAN Nai-yuan
2010, 32(7): 938-945. DOI: 10.13374/j.issn1001-053x.2010.07.018
Abstract PDF
Localization algorithm based on semi-supervised manifold learning in wireless sensor networks and its application
YANG Bin, XU Jin-wu, YANG Jian-hong, LI Min
2010, 32(7): 946-951. DOI: 10.13374/j.issn1001-053x.2010.07.023
Abstract PDF
Delay-dependent stability for uncertain discrete-time systems with time-varying delay by a piecewise analysis approach
ZHANG Lei, LIU He-ping, LIAO Fu-cheng
2010, 32(7): 952-956. DOI: 10.13374/j.issn1001-053x.2010.07.024
Abstract PDF