column
Numerical simulation on the diffusion law of blasting fume during roadway tunneling across a vein in an alpine mine
CHEN Zan-cheng, YANG Peng, LÜ Wen-sheng, HE Lei, MEN Rui-ying
2011, 33(5): 521-525. DOI: 10.13374/j.issn1001-053x.2011.05.003
Abstract PDF
Ore blending of underground mines based on an immune clone selection optimization algorithm
YAO Xu-long, HU Nai-lian, ZHOU Li-hui, LI Yong
2011, 33(5): 526-531. DOI: 10.13374/j.issn1001-053x.2011.05.004
Abstract PDF
Effects of chemical mutation on the microbial leaching of low grade copper tailings
DONG Ying-bo, LIN Hai, FU Kai-bin, MO Xiao-lan, WANG Han
2011, 33(5): 532-538. DOI: 10.13374/j.issn1001-053x.2011.05.016
Abstract PDF
Transient simulation on the behavior of inclusions in liquid steel of the tundish with a filter
ZHAO Xin-yu, ZHANG Jiong-ming, WU Su-zhou, HU Bo
2011, 33(5): 539-543. DOI: 10.13374/j.issn1001-053x.2011.05.017
Abstract PDF
Effects of Li2O on the crystallization and heat transfer of mould fluxes for high Al steel
WANG Huan, TANG Ping, WEN Guang-hua, YU Xiong
2011, 33(5): 544-549. DOI: 10.13374/j.issn1001-053x.2011.05.018
Abstract PDF
Effects of intermediate cooling and tempering process on martensite-austenite constituents in niobium-bearing low carbon steel
YU Wei, CHEN Tao, JIAO Duo-tian, CAI Qing-wu
2011, 33(5): 550-556. DOI: 10.13374/j.issn1001-053x.2011.05.005
Abstract PDF
Effects of finish rolling temperature on the microstructure and mechanical properties of X80 high deformability pipeline steel
ZHENG Xiao-fei, KANG Yong-lin, MENG De-liang, AN Shou-yong, XIA Dian-xiu
2011, 33(5): 557-562. DOI: 10.13374/j.issn1001-053x.2011.05.006
Abstract PDF
Surface analysis of spangles on batch hot-dipped Zn-0.05Al-0.2Sb alloy coatings
LU Jin-tang, ZHANG Wei-wei, PENG Shu, CHE Chun-shan
2011, 33(5): 563-569. DOI: 10.13374/j.issn1001-053x.2011.05.007
Abstract PDF
Seawater temperature on the protection properties of epoxy coatings used in deep sea
SUN Xiao-hua, GAO Jin, GUO Wei-min, CHENG Wen-hua, LI Xiao-gang
2011, 33(5): 570-574. DOI: 10.13374/j.issn1001-053x.2011.05.008
Abstract PDF
Preparation and characterization of antibacterial Ag-SiO2 films on stainless steel by sol-gel method
PENG Shuai, ZHENG Yu-dong, HAN Dong-fei, LIU Hui, ZHANG Xiao-bo, LIU Xing-fu, ZHANG Jing
2011, 33(5): 575-580. DOI: 10.13374/j.issn1001-053x.2011.05.009
Abstract PDF
Plasma cladding coatings by precursor carbonization-composition process
LIU Jun-bo, HUANG Ji-hua, LIU Jun-hai, SONG Gui-xiang
2011, 33(5): 581-586. DOI: 10.13374/j.issn1001-053x.2011.05.010
Abstract PDF
Effect of strain rate on the microstructural evolution of hot deformed GH625 superalloy
GUO Qing-miao, LI De-fu, PENG Hai-jian, GUO Sheng-li, WU Zhi-gang, HU Jie, DU Peng
2011, 33(5): 587-592. DOI: 10.13374/j.issn1001-053x.2011.05.011
Abstract PDF
Effects of process parameters on the surface quality, microstructure and mechanical properties of Cu-12%Al wires fabricated by continuous unidirectional solidification
LIU Jin-ping, LIU Xue-feng, HUANG Hai-you, XIE Jian-xin
2011, 33(5): 593-599. DOI: 10.13374/j.issn1001-053x.2011.05.012
Abstract PDF
Compressive flow stress model of BFe10-1-1 alloy fabricated by continuous unidirectional solidification process using ANFIS
GAN Chun-lei, LIU Xue-feng, HUANG Hai-you, XIE Jian-xin
2011, 33(5): 600-605. DOI: 10.13374/j.issn1001-053x.2011.05.013
Abstract PDF
Slag-fly ash based cementitious materials special for high performance concrete
FU Cheng-hong, NI Wen, ZHANG Xu-fang, WANG Zhong-jie, TIAN Ming-yang
2011, 33(5): 606-613. DOI: 10.13374/j.issn1001-053x.2011.05.001
Abstract PDF
Mechanochemical preparation of calcined diatomite/α-Fe2O3 composite particle materials
XUE Qiang, DU Gao-xiang, LIAO Li-bing, DING Hao, ZHAO Chao-xing
2011, 33(5): 614-618. DOI: 10.13374/j.issn1001-053x.2011.05.002
Abstract PDF
Fabrication and characterization of black polycrystalline silicon
LIU Bang-wu, XIA Yang, LIU Jie, LI Chao-bo
2011, 33(5): 619-622. DOI: 10.13374/j.issn1001-053x.2011.05.022
Abstract PDF
Combustion model of a hot blast stove based on numerical simulation
CHEN Shan-shan, GUO Hong-wei, ZHANG Jian-liang, YANG Tian-jun
2011, 33(5): 627-631. DOI: 10.13374/j.issn1001-053x.2011.05.020
Abstract PDF
Numerical simulation and application of a regenerative thermal oxidizer
XIAO Qi, JIANG Ze-yi, ZHANG Xin-xin
2011, 33(5): 632-635. DOI: 10.13374/j.issn1001-053x.2011.05.021
Abstract PDF
Generation mechanism of axial force on the roll systems of a 2250 hot continuous rolling R2 rolling mill
YAN Xiao-qiang, HUANG Sen, NIU Li-xin, ZHU Guang-hong, KONG Shun-fu
2011, 33(5): 636-640. DOI: 10.13374/j.issn1001-053x.2011.05.014
Abstract PDF
Modelling and algorithm for the slab designing problem based on constraint satisfaction
ZHANG Wen-xue, LI Tie-ke
2011, 33(5): 641-646. DOI: 10.13374/j.issn1001-053x.2011.05.015
Abstract PDF