column
Water model research on decreasing the casting remnant of high quality IF steel
YUAN Pin, BAO Yan-ping, CUI Heng, ZHANG Ying-hua, MA Wei, JI Chen-xi
2011, 33(S1): 1-5. DOI: 10.13374/j.issn1001-053x.2011.s1.006
Abstract PDF
Study on molten steel flow mechanism in 210t RH snorkels by water model experimental
GUO Han-jie, LI Ning, SHEN Tian-tian
2011, 33(S1): 6-11. DOI: 10.13374/j.issn1001-053x.2011.s1.007
Abstract PDF
Refining theory and process of high-speed heavy-rail steel
QI Jiang-hua, WU Jie, XUE Zheng-liang, TIAN Qing, JI Yu
2011, 33(S1): 12-15. DOI: 10.13374/j.issn1001-053x.2011.s1.008
Abstract PDF
Gas prediction and optimization system in steelmaking
ZHANG Hai-ning, ZHU Rong, LU Zhi-fang, LI Gui-hai, MA Guo-hong
2011, 33(S1): 16-19. DOI: 10.13374/j.issn1001-053x.2011.s1.009
Abstract PDF
RH decarburization model based on off-gas analysis
LIN Lu, BAO Yan-ping, YUE Feng, WANG Min, OU Hong-lin
2011, 33(S1): 20-24. DOI: 10.13374/j.issn1001-053x.2011.s1.010
Abstract PDF
Thermodynamic calculation and experimental study of de-titanium in hot metal pretreatment
WU Wei, NI Bing, LIU Zhuang-zhuang
2011, 33(S1): 25-28. DOI: 10.13374/j.issn1001-053x.2011.s1.011
Abstract PDF
Theory analysis and experimental study on the removal of titanium from hot metal
XU Ying-tie, CHEN Zhao-ping, XIA Xing-ming
2011, 33(S1): 29-33. DOI: 10.13374/j.issn1001-053x.2011.s1.012
Abstract PDF
Theoretical analysis on the influence of Coriolis force on the flow field of combined side and top blowing AOD converter
TANG Hai-yan, LI Jing-she, DING Xiao-ming, TANG Wen-dan
2011, 33(S1): 34-37. DOI: 10.13374/j.issn1001-053x.2011.s1.001
Abstract PDF
Alloy formula derivation and analysis of composition adjustment of molten steel in ladle furnace
YAN Li-yi, GONG Zhe-hao
2011, 33(S1): 38-41. DOI: 10.13374/j.issn1001-053x.2011.s1.013
Abstract PDF
Continuous casting process of ultra low carbon aluminum killed steel for blooms
MA Fu-ping, BAO Yan-ping, WANG Yu-nan, WANG Min
2011, 33(S1): 42-45. DOI: 10.13374/j.issn1001-053x.2011.s1.014
Abstract PDF
Effect of cold and annealing process on deep-drawing of SUS430 ferrite stainless steel
CHEN Pei-dun, ZHANG Zheng-fa, MA Zheng-wei, WANG Hong-xia
2011, 33(S1): 46-50. DOI: 10.13374/j.issn1001-053x.2011.s1.002
Abstract PDF
Solid-state reduction mechanism of Fe and Ni in Fe-Ni-O-C systems
ZHANG Yan-ling, YANG Xiao-gang, WEI Wen-jie, QI Cheng-lin
2011, 33(S1): 51-56. DOI: 10.13374/j.issn1001-053x.2011.s1.015
Abstract PDF
Smelting technology of non-quenched and tempered N80 steel by BOF-LF-VD
GAO Jin-tao, LI Shi-qi, GUAN Yong, LIU Run-zao, WANG Yu-gang
2011, 33(S1): 57-62. DOI: 10.13374/j.issn1001-053x.2011.s1.016
Abstract PDF
Study on the dephosphorization of hot metal in converter
GAO Sheng-yong, TIAN Zhi-hong, ZHU Li-xin, ZHAO Zhang-liang, YAN Zhan-hui, LUO Bo-gang, WEI Gang
2011, 33(S1): 63-67. DOI: 10.13374/j.issn1001-053x.2011.s1.017
Abstract PDF
Dephosphorization in converters and oxidation characteristics of molten baths
QU Tie, ZHU Wan-jun, WANG Guo-ping, LI Xiao-ming, WANG Jin-ping, YANG Cheng-wei
2011, 33(S1): 68-72. DOI: 10.13374/j.issn1001-053x.2011.s1.018
Abstract PDF
Equilibrium of Al-C-O in high-carbon molten iron
LI Ning, GUO Han-jie, ZHANG Xin
2011, 33(S1): 73-76. DOI: 10.13374/j.issn1001-053x.2011.s1.019
Abstract PDF
Influencing factors of EAF off-gas composition
DONG Kai, ZHU Rong, LIU Wen-juan, WANG Xue-li, LI Meng, SUN Yong-xi
2011, 33(S1): 77-82. DOI: 10.13374/j.issn1001-053x.2011.s1.020
Abstract PDF
Thermodynamic analysis of limestone decomposition and CO2 oxidation effect in the early stage of BOF steelmaking
LI Hong, FENG Jia, LI Yong-qing, GUO Luo-fang, SONG Wen-chen
2011, 33(S1): 83-87. DOI: 10.13374/j.issn1001-053x.2011.s1.021
Abstract PDF
Prevention and controlling of vacuum boiling in the process of VOD refining for stainless steel
LI Shi, CHI He-bing, LIU Hong, DONG Zhi-ping, CHENG Wei
2011, 33(S1): 88-92. DOI: 10.13374/j.issn1001-053x.2011.s1.022
Abstract PDF
Experiment of the coherent jet lance combustion behavior
SHEN Jing-xia, DONG Kai, LIU Wen-juan, ZHU Rong
2011, 33(S1): 93-97. DOI: 10.13374/j.issn1001-053x.2011.s1.038
Abstract PDF
Dephosphorization of high-phosphorous oolitic hematite carbon-containing pellets in western Hubei
SONG Yan-qi, LI Jing-she, DING Xiao-ming, WANG Jing-hui, SUN Li-yuan
2011, 33(S1): 98-102. DOI: 10.13374/j.issn1001-053x.2011.s1.023
Abstract PDF
Industrial experiment of improving the castability of SPHD steel
ZHU Jing-tao, LI Jing-she, SUN Li-yuan, SONG Fang-fang, DING Xiao-ming
2011, 33(S1): 103-107. DOI: 10.13374/j.issn1001-053x.2011.s1.024
Abstract PDF
TMCP of E/F grade high-strength ship plates in Shougang Co.
XU Yong-lin, LI Jing-she, XU Li
2011, 33(S1): 108-115. DOI: 10.13374/j.issn1001-053x.2011.s1.025
Abstract PDF
Metallurgy effect of calcium treatment in high grade pipeline steel
SUN Yan-hui, XIONG Hui-hui, WANG Xiao-song, CHEN Yong, WU Guo-rong, PAN Hong
2011, 33(S1): 116-120. DOI: 10.13374/j.issn1001-053x.2011.s1.026
Abstract PDF
Metallurgy effect of calcium treatment in high grade pipeline steel
SUN Yan-hui, WANG Xiao-song, XU Zhong-bo, CAI Kai-ke, WANG Chun-feng, LIU Liang-tian
2011, 33(S1): 121-125. DOI: 10.13374/j.issn1001-053x.2011.s1.027
Abstract PDF
Application research of carbon dioxide in BOF steelmaking process
LÜ Ming, ZHU Rong, BI Xiu-rong, LIN Teng-chang
2011, 33(S1): 126-130. DOI: 10.13374/j.issn1001-053x.2011.s1.028
Abstract PDF
Cleanliness of DH36 ship plate steel produced by BOF-LF-RH-CC processes
WU Hua-jie, YUAN Peng-fei, YUE Feng
2011, 33(S1): 131-136. DOI: 10.13374/j.issn1001-053x.2011.s1.029
Abstract PDF
Effect of LF refining on T[O] and inclusions of container steel in compact strip production process
ZHU Wan-jun, QU Tie, LI Guang-qiang, SHEN Ji-sheng, WANG Chun-feng
2011, 33(S1): 137-141. DOI: 10.13374/j.issn1001-053x.2011.s1.030
Abstract PDF
Decarburization treatment and inclusion control during RH refining
SUN Qun, LIN Yang, LI Wei-dong
2011, 33(S1): 142-146. DOI: 10.13374/j.issn1001-053x.2011.s1.031
Abstract PDF
Cleanliness control of IF steel during the RH refining process
CUI Heng, CHEN Bin, WANG Min, LIU Feng-gang, QING Jing, JING Ming-wei
2011, 33(S1): 147-150. DOI: 10.13374/j.issn1001-053x.2011.s1.032
Abstract PDF
Control of sulfur content in the production of clean steel
YANG Sen-xiang
2011, 33(S1): 151-156. DOI: 10.13374/j.issn1001-053x.2011.s1.033
Abstract PDF
The solidified structure and inclusions of high-purity ferritic stainless steel stabilized with Ti or Nb
SUN Li-feng, WANG Hong-po, LIU Chun-lai, ZOU Yong
2011, 33(S1): 157-160. DOI: 10.13374/j.issn1001-053x.2011.s1.003
Abstract PDF
Study on composition segregation of X1215 free-cutting steel continuous casting billet
WANG Hong-bin, LIN Teng-chang, ZHU Rong, DUAN Fei-hu, LI Lian-sheng, ZHANG Zhi-qiang, WANG Yong
2011, 33(S1): 161-164. DOI: 10.13374/j.issn1001-053x.2011.s1.034
Abstract PDF
Control technology for oxygen content and inclusions of gear steel
CHEN Tian-ming, YANG Su-bo, WANG Xin-hua
2011, 33(S1): 165-172. DOI: 10.13374/j.issn1001-053x.2011.s1.035
Abstract PDF
Inclusions in the surface layer of IF steel slab
CHEN Jun-jie, LIU Jian-hua, LIU Jian-fei, ZHUANG Chang-ling
2011, 33(S1): 173-178. DOI: 10.13374/j.issn1001-053x.2011.s1.036
Abstract PDF
Inclusion distribution in H13 ingots
LIU Jian-hua, YANG Yan, ZHUANG Chang-ling, CUI Xiao-ning, LI Yong-liang
2011, 33(S1): 179-184. DOI: 10.13374/j.issn1001-053x.2011.s1.004
Abstract PDF
Basic properties and comprehensive utilization of iron-containing sludge & dust in the steelmaking process
ZHUANG Chang-ling, LIU Jian-hua, CUI Heng, LIU Song-tao, Daniele R Attorre, Jim Hunt
2011, 33(S1): 185-192. DOI: 10.13374/j.issn1001-053x.2011.s1.005
Abstract PDF
Shear properties of epoxy polymer overlays on bridge decks
WU Di, ZHANG Hong-chao
2011, 33(S1): 193-198. DOI: 10.13374/j.issn1001-053x.2011.s1.037
Abstract PDF