column
Mix ratio optimization of alpine mine backfill based on the response surface method
ZHAO Guo-yan, MA Ju, PENG Kang, YANG Qing, ZHOU Li
2013, 35(5): 559-565. DOI: 10.13374/j.issn1001-053x.2013.05.003
Abstract PDF
Dynamic compaction and static compaction mechanism of fine unclassified tailings
WANG Hong-jiang, WANG Yong, WU Ai-xiang, ZHOU Bo, YANG Peng, YU Shao-feng, PENG Nai-bing
2013, 35(5): 566-571. DOI: 10.13374/j.issn1001-053x.2013.05.004
Abstract PDF
Microscopic properties of drilling sealing materials and their influence on the sealing performance of boreholes
NI Guan-hua, LIN Bo-quan, ZHAI Cheng, LI Quan-gui, LI Xian-zhong, ZHENG Chun-shan
2013, 35(5): 572-579. DOI: 10.13374/j.issn1001-053x.2013.05.005
Abstract PDF
Evolution of inclusions during refining in low carbon Al-killed steel produced by BOF-LF-CSP process
YANG Die, WANG Xin-hua, QIN Yi-ming, DENG Xiao-xuan, YANG Wen
2013, 35(5): 580-585. DOI: 10.13374/j.issn1001-053x.2013.05.013
Abstract PDF
Strengthening mechanisms of oxide dispersion strengthened steel
GUO Li-na, HU Ben-fu, LIU An-qiang, JIA Cheng-chang, LI Hui-ying
2013, 35(5): 586-591. DOI: 10.13374/j.issn1001-053x.2013.05.006
Abstract PDF
Microstructure regulation and mechanical properties of low-carbon multiphase steels
REN Yong-qiang, XIE Zhen-jia, SHANG Cheng-jia
2013, 35(5): 592-600. DOI: 10.13374/j.issn1001-053x.2013.05.007
Abstract PDF
Thermal aging embrittlement of cast stainless steel for nuclear primary pipes
LI Shu-xiao, LI Shi-lei, LÜ Xu-ming, WANG Yan-li, XUE Fei, WANG Xi-tao
2013, 35(5): 601-606. DOI: 10.13374/j.issn1001-053x.2013.05.020
Abstract PDF
Hot plasticity and fracture mechanism of the third generation of automobile steel
FAN Yi, WANG Ming-lin, ZHANG Hui, TAO Hong-biao, ZHAO Pei, LI Shi-qi
2013, 35(5): 607-612. DOI: 10.13374/j.issn1001-053x.2013.05.008
Abstract PDF
Failure analysis of 22Si2MnCrNi2MoA drilling rods
ZHU Hong-wu, LIU Ya-zheng, ZHOU Le-yu, WANG Lei-ying, HUANG Bin
2013, 35(5): 613-619. DOI: 10.13374/j.issn1001-053x.2013.05.009
Abstract PDF
Effect of textures on the corrosion resistance of nanocrystalline Ni coatings
SUN Dong-lai, CHEN Ji, SHI Yan-hua, LIANG Ping
2013, 35(5): 620-625. DOI: 10.13374/j.issn1001-053x.2013.05.001
Abstract PDF
Damage characterization and recognition of aluminum alloys based on acoustic emission signal
ZHANG Wei-dong, ZHANG Xi-wen, YANG Bin, DING Xian-fei, AI Yi-bo
2013, 35(5): 626-633. DOI: 10.13374/j.issn1001-053x.2013.05.010
Abstract PDF
Numerical study on the micro-galvanic corrosion of AZ31 magnesium alloy
GAO Fu-yong, ZHAO Ming, HE Guang-ping, FANG Ke-ming
2013, 35(5): 634-641. DOI: 10.13374/j.issn1001-053x.2013.05.011
Abstract PDF
Electrochemical preparation of Rh nanoparticles and their application as SERS substrates
LI Yuan-yuan, XU Dun, XIE Yong-hong, SUN Jie, JIN Tao, LIU Yan-jun, DIAO Peng
2013, 35(5): 642-650. DOI: 10.13374/j.issn1001-053x.2013.05.002
Abstract PDF
Photocatalytic activity of monolithic TiO2-SiO2 composite aerogels obtained by ambient drying for degrading oily wastewater
LI Xing-wang, ZHAO Hai-lei, LÜ Peng-peng, ZHU Xiao-hui, YAO Ke-fu, XU Li-hua
2013, 35(5): 651-658. DOI: 10.13374/j.issn1001-053x.2013.05.015
Abstract PDF
Preparation of cementitious materials with sintering desulfurization ash,blast furnace slag and cement clinker
LIANG Bao-rui, SONG Cun-yi, WANG Li, SUN Peng-hui, LENG Ting-shuang
2013, 35(5): 659-666. DOI: 10.13374/j.issn1001-053x.2013.05.016
Abstract PDF
Temperature simulation of the heating segment of large bright annealing muffle furnaces
YANG Jing, WU Chuan-biao, SUN Chao-yang, YE Nai-wei, LOU Qi-xi
2013, 35(5): 667-673. DOI: 10.13374/j.issn1001-053x.2013.05.012
Abstract PDF
Improved method of spectral correlation density and its applications in fault diagnosis
LU Qiao-qiao, LI Min, WANG Xiao-jing
2013, 35(5): 674-681. DOI: 10.13374/j.issn1001-053x.2013.05.017
Abstract PDF
Pseudo-rigid-body model of a six-bar full-compliant mechanism
QIU Li-fang, HUO Ming-lei, LI Wei
2013, 35(5): 682-686. DOI: 10.13374/j.issn1001-053x.2013.05.019
Abstract PDF
Unified modeling and intelligent algorithm of production planning for the process of steelmaking,continuous casting and hot rolling
ZHENG Zhong, LIU Yi, CHEN Kai, GAO Xiao-qiang
2013, 35(5): 687-693. DOI: 10.13374/j.issn1001-053x.2013.05.014
Abstract PDF
Efficient 3D ear reconstruction by employing the 3D ear morphable model
LI Chen, MU Zhi-chun, ZHANG Feng, ZHANG Bao-qing
2013, 35(5): 694-702. DOI: 10.13374/j.issn1001-053x.2013.05.018
Abstract PDF