column
Flow characteristics of argon bottom blowing in an ellipse ladle
NGUYEN Van-khang, BAO Yan-ping, WANG Min, LIN Lu, LI Xiang
2014, 36(S1): 1-5. DOI: 10.13374/j.issn1001-053x.2014.s1.001
Abstract PDF
Thermodynamic study on the effect of Nb-V alloy on the nitrogen solubility in HRB400 steel
MA Yu, LI Jing-she, LIU Wei, SUN Li-yuan, YANG Shu-feng, ZHAO Ming
2014, 36(S1): 6-9. DOI: 10.13374/j.issn1001-053x.2014.s1.002
Abstract PDF
Evolution of surface porosity in round steel hot rolling
MAO Xiao-hui, ZHANG Jiang-shan, YANG Shu-feng
2014, 36(S1): 10-14. DOI: 10.13374/j.issn1001-053x.2014.s1.003
Abstract PDF
Effect of oxygen lance position on the flow velocity of molten steel in BOF
LI Zhi-zheng, ZHU Rong, LIU Run-zao, LÜ Ming, WANG Hui-zhi
2014, 36(S1): 15-20. DOI: 10.13374/j.issn1001-053x.2014.s1.004
Abstract PDF
Effect of different coating binders on the high-temperature heat-insulating properties of heat insulating coatings
CAO Guang-yuan, GUO Han-jie, LI Lin, LI Hong-liang, GUO Chuang
2014, 36(S1): 21-26. DOI: 10.13374/j.issn1001-053x.2014.s1.005
Abstract PDF
Leaching and carbonation of steelmaking slag
TANG Hai-yan, MENG Wen-jia, SUN Shao-heng, LIU Hui, WANG Shuang, LI Jing-she
2014, 36(S1): 27-31. DOI: 10.13374/j.issn1001-053x.2014.s1.006
Abstract PDF
Cleanliness study of IF steel by holding in ladles after RH vacuum process
CUI Heng, TIAN En-hua, CHEN Bin, QING Jing, WANG Wei
2014, 36(S1): 32-35. DOI: 10.13374/j.issn1001-053x.2014.s1.007
Abstract PDF
Decarburization and denitrogenation in VOD process for ultra clean ferritic stainless steel
XU Ying-tie, CHEN Zhao-ping, LI Shi
2014, 36(S1): 36-40. DOI: 10.13374/j.issn1001-053x.2014.s1.008
Abstract PDF
Parameter optimization of aluminum wire feeding process during LF refining
ZHANG Peng, CHENG Shu-sen, CHEN Chuan
2014, 36(S1): 41-46. DOI: 10.13374/j.issn1001-053x.2014.s1.009
Abstract PDF
Mathematical model for the AOD oxidation refining process of low carbon TWIP steel
ZHANG Ping, LIU Jian-hua, ZHUANG Chang-ling, ZHANG Qing-lei, LEI Chong, WANG Zi-jun
2014, 36(S1): 47-52. DOI: 10.13374/j.issn1001-053x.2014.s1.010
Abstract PDF
Physical simulation of refining process optimization for bottom argon blowing in a 250 t ladle
ZHENG Wan, TU Hao, LI Guang-qiang, SHEN Xing, XU Yun-long, ZHU Cheng-yi, LU Kai
2014, 36(S1): 53-59. DOI: 10.13374/j.issn1001-053x.2014.s1.011
Abstract PDF
Process capability optimization of temperature control in high-carbon steel production by BOF process
XING Mei-luan, BAO Yan-ping, LIN Lu
2014, 36(S1): 60-64. DOI: 10.13374/j.issn1001-053x.2014.s1.012
Abstract PDF
Thermodynamic analysis on the minimum oxygen content in molten steel using aluminum and carbon
LI Ning, GUO Han-jie
2014, 36(S1): 65-71. DOI: 10.13374/j.issn1001-053x.2014.s1.013
Abstract PDF
Corrosion behaviors of RE heavy rail in simulated industrial atmosphere
WANG Xiao-li, SONG Bo, AN Sheng-li, FU Guo-ping, PENG Jun
2014, 36(S1): 72-76. DOI: 10.13374/j.issn1001-053x.2014.s1.014
Abstract PDF
Effect of Mn/S on sulfide inclusions in non-quenched and tempered steel containing sulfur
WU Hua-jie, YUE Feng, YOU Da-li, LU Peng-yan, LIU Jing, CHEN Wei-wei, ZHOU Lei
2014, 36(S1): 77-82. DOI: 10.13374/j.issn1001-053x.2014.s1.015
Abstract PDF
Large eddy simulation of turbulent flow in a continuous casting mold
AN Li-na, LI Jing-she, GE Dong, CHENG Ai-min, JI Chuan-bo, SUN Li-yuan
2014, 36(S1): 83-88. DOI: 10.13374/j.issn1001-053x.2014.s1.016
Abstract PDF
Analysis of the surface crack on casting bloom of low carbon and high manganese steel
SUN Yan-hui, XU Rui, CENG Ya-nan, AI Xi
2014, 36(S1): 89-92. DOI: 10.13374/j.issn1001-053x.2014.s1.017
Abstract PDF
Experimental study on the coal-based method to deal with pyrite cinder for preparing sulfur-bearing steel
GUO Ya-guang, ZHU Rong, WU En-hui, WANG Yun, LIN Teng-chang, XIAO Yi
2014, 36(S1): 93-97. DOI: 10.13374/j.issn1001-053x.2014.s1.018
Abstract PDF
Simulation on fluid flow in a slab continuous casting mould
YANG Jing-bo, LI Jing-she, ZHANG Jiang-shan, GAO Xiang-zhou, YANG Shu-feng
2014, 36(S1): 98-103. DOI: 10.13374/j.issn1001-053x.2014.s1.019
Abstract PDF
Alloy charging optimization model based on the yield dynamic libraries
YANG Ling-zhi, WANG Xue-yi, WANG Zhi-dong, WANG Zhen-xiang
2014, 36(S1): 104-109. DOI: 10.13374/j.issn1001-053x.2014.s1.020
Abstract PDF
Research on the heat supply of different sections in a rotary hearth furnace
GAO Jin-tao, ZHOU Chun-fang, ZHU Rong, LIU Run-zao
2014, 36(S1): 110-116. DOI: 10.13374/j.issn1001-053x.2014.s1.021
Abstract PDF
Water modeling study on the bottom blowing of N2 in a ferrovanadium electric arc furnace
LIU Wen-juan, DONG Kai, WANG Rao
2014, 36(S1): 117-121. DOI: 10.13374/j.issn1001-053x.2014.s1.022
Abstract PDF
Analysis of Si volatilization during the BOF steelmaking process using limestone for slagging
NIAN Wu, FENG Jia, LI Chen-xiao, SONG Wen-chen, LI Hong
2014, 36(S1): 122-125. DOI: 10.13374/j.issn1001-053x.2014.s1.023
Abstract PDF
Thermodynamic optimization of the CaO-Al2O3-SiO2-MgO slag system
TIAN Dong-dong, ZHANG Yan-ling, LIU Qing-bo, WEN Xin-shu
2014, 36(S1): 126-132. DOI: 10.13374/j.issn1001-053x.2014.s1.024
Abstract PDF
Effect of Mn and Si on the microstructure and mechanical properties of medium manganese hot-rolled high-strength steel
ZHAO Zheng-zhi, TONG Ting-ting, ZHAO Ai-min, YIN Hong-xiang, LI Shuang-jiao, LIANG Ju-hua
2014, 36(S1): 133-139. DOI: 10.13374/j.issn1001-053x.2014.s1.025
Abstract PDF
Physical modeling of argon bottom blowing refining in a 100 t ladle
ZHAO Li-hua, MA Wen-jun, WANG Min
2014, 36(S1): 140-144. DOI: 10.13374/j.issn1001-053x.2014.s1.026
Abstract PDF
Effects of Zr on the solidification structure and hot ductility of Fe-36Ni invar alloy
ZHENG Hong-guang, LI Yuan, LIU Xu-feng
2014, 36(S1): 145-150. DOI: 10.13374/j.issn1001-053x.2014.s1.027
Abstract PDF
Nitrogen alloying behavior of 316 L stainless steel
SHI Yan-lin, BAO Yan-ping, CUI Heng, CHEN Ya-nan
2014, 36(S1): 151-155. DOI: 10.13374/j.issn1001-053x.2014.s1.028
Abstract PDF
Simulation on influence of MgO content on liquid phase in CaO-SiO2-Al2O3-MgO slag
LIN Teng-chang, ZHU Rong, WANG Cheng-jie, LI Chao, LI Ming-gang
2014, 36(S1): 156-161. DOI: 10.13374/j.issn1001-053x.2014.s1.029
Abstract PDF
Source analysis on high SiO2 inclusions in interstitial free(IF) steel slab
WANG Min, YANG Quan
2014, 36(S1): 162-167. DOI: 10.13374/j.issn1001-053x.2014.s1.030
Abstract PDF
Study on CaO and CaS inclusions in pipeline steel during refining process
LI Shu-sen, REN Ying, ZHANG Li-feng, YANG Wen
2014, 36(S1): 168-172. DOI: 10.13374/j.issn1001-053x.2014.s1.031
Abstract PDF
Inclusion morphology control of soft-killed deoxidation spring steel
QI Jiang-hua, WU Chao, LUO De-xin, YANG Cheng-wei, QU Tie
2014, 36(S1): 173-176. DOI: 10.13374/j.issn1001-053x.2014.s1.032
Abstract PDF
Influence of Al2O3 content on inclusions in spring steel
ZHOU Li, WANG Xiang-hong
2014, 36(S1): 177-181. DOI: 10.13374/j.issn1001-053x.2014.s1.033
Abstract PDF
Analysis on inclusions in bearing steels
YANG Wen, ZHANG Li-feng, HU Yu-xin, FAN Fu-hua, LI Guo-guang
2014, 36(S1): 182-188. DOI: 10.13374/j.issn1001-053x.2014.s1.034
Abstract PDF
Mechanism of modifying oxide and sulphide by Mg in liquid iron at 1873 K
ZHANG Tong-sheng, WANG De-yong, LIU Cheng-jun, JIANG Mao-fa, LÜ Ming, WANG Bo
2014, 36(S1): 189-193. DOI: 10.13374/j.issn1001-053x.2014.s1.035
Abstract PDF
Optimization of refining slag composition for low carbon low silicon Al-killed steel during CSP process
GUO Jing, CHENG Shu-sen, CHENG Zi-jian, ZHANG Peng
2014, 36(S1): 194-199. DOI: 10.13374/j.issn1001-053x.2014.s1.036
Abstract PDF
On-line liquid steel temperature control for the steelmaking-continuous casting process
HE Dong-feng, HE Fei, XU An-jun, TIAN Nai-yuan
2014, 36(S1): 200-206. DOI: 10.13374/j.issn1001-053x.2014.s1.037
Abstract PDF
Practice of double slag deep dephosphorization technology in combined blown converter
HU Xiao-guang, LI Jing, WU He, ZHOU Chao-gang, CAI Ke-sen, WU Guo-ping
2014, 36(S1): 207-212. DOI: 10.13374/j.issn1001-053x.2014.s1.038
Abstract PDF
Study on improvement in uniformity of a multi-strand tundish
XIE Wen-xin, BAO Yan-ping, WANG Min, ZHANG Li-qiang, LI Rui
2014, 36(S1): 213-217. DOI: 10.13374/j.issn1001-053x.2014.s1.039
Abstract PDF
Analysis of causes for surface tarnishing of 304 pickling plate
CHEN Pei-dun, TANG Xu-wei, LI Chao, ZHANG Shuang, WU Yue-long
2014, 36(S1): 218-221. DOI: 10.13374/j.issn1001-053x.2014.s1.040
Abstract PDF
Study on the bottom blowing of N2 in an EAF producing ferrovanadium by water modeling
DONG Kai, LIU Run-zao, WANG Rao, LIU Wen-juan, ZHOU Chun-fang
2014, 36(S1): 222-225. DOI: 10.13374/j.issn1001-053x.2014.s1.041
Abstract PDF
Influence of bottom blowing CO2 in LF on molten steel quality and erosion of ventilated bricks
DONG Kai, ZHU Rong, LIU Run-zao, WANG Huan, ZHOU Chun-fang
2014, 36(S1): 226-229. DOI: 10.13374/j.issn1001-053x.2014.s1.042
Abstract PDF
Effect of Mn/S on sulfide inclusions in non-quenched and tempered steel containing sulfur
WU Hua-jie, LU Peng-yan, YUE Feng, ZHOU Lei, CHEN Wei-wei, YOU Da-li
2014, 36(S1): 230-234. DOI: 10.13374/j.issn1001-053x.2014.s1.043
Abstract PDF