column
Research of the isolated extraction zone form and determination of optimal independent advance under different end wall angles
SUN Hao, JIN Ai-bing, GAO Yong-tao, MENG Xin-qiu
2016, 38(2): 159-166. DOI: 10.13374/j.issn2095-9389.2016.02.001
Abstract PDF
Chaotic time series reconstruction of the concentration of leaching solution and leaching period prediction of quasi-sandstone type ore
LIU Chao, WU Ai-xiang, YIN Sheng-hua, KE Jin-fu, CHEN Xun
2016, 38(2): 167-174. DOI: 10.13374/j.issn2095-9389.2016.02.002
Abstract PDF
Direct reduction roasting process of seaside titanomagnetite with coal slime as a reductant
YU Chun-xiao, SUN Ti-chang, GAO En-xia, LIU Zhi-guo, XU Cheng-yan
2016, 38(2): 175-180. DOI: 10.13374/j.issn2095-9389.2016.02.003
Abstract PDF
Experimental research on the deep reduction-magnetic separation of ironsand
LIU Yi-ran, ZHANG Jian-liang, WANG Zhen-yang, LIU Zheng-jian, XING Xiang-dong
2016, 38(2): 181-186. DOI: 10.13374/j.issn2095-9389.2016.02.004
Abstract PDF
Phase transformation of the diasporic bauxite-sodium hydroxide system in microwave heating
LI Shi-qiong-chun, JU Shao-hua, PENG Jin-hui, WANG Shi-xing, ZHOU Lie-xing
2016, 38(2): 187-193. DOI: 10.13374/j.issn2095-9389.2016.02.005
Abstract PDF
Transverse mixing of binary solid materials in a rotating kiln
CHEN Hui, XIAO You-gang, ZHAO Xian-qiong, LIU Ying, LIU Yi-lun
2016, 38(2): 194-199. DOI: 10.13374/j.issn2095-9389.2016.02.006
Abstract PDF
Effects of stand-support on the sintering process
LIU Zheng-jian, WANG Yao-zu, ZHANG Jian-liang, ZHANG Ya-peng, ZUO Hai-bin
2016, 38(2): 200-206. DOI: 10.13374/j.issn2095-9389.2016.02.007
Abstract PDF
Preparation and processing parameter research of high basicity steel slag-based glass-ceramics with one-step sintering process
ZHAO Gui-zhou, LI Yu, DAI Wen-bin, CANG Da-qiang
2016, 38(2): 207-212. DOI: 10.13374/j.issn2095-9389.2016.02.008
Abstract PDF
Constitutive model and dynamic deformation behavior of 800 MPa grade cold-rolled dual phase steel
CAI Heng-jun, HU Jing-fan, SONG Ren-bo, DAI Qi-feng
2016, 38(2): 213-222. DOI: 10.13374/j.issn2095-9389.2016.02.009
Abstract PDF
Effect of pretreated microstructure on the morphology and mechanical properties of low-carbon steel with IQ&P treatment
CHEN Lian-sheng, ZHANG Jian-yang, TIAN Ya-qiang, SONG Jin-ying, XU Yong, ZHANG Shi-hong
2016, 38(2): 223-229. DOI: 10.13374/j.issn2095-9389.2016.02.010
Abstract PDF
Effect of precipitates on the austenite grain growth of titanium microalloyed high performance steel
LUO Xu, YANG Cai-shui, KANG Yong-lin, LI Jun-hong
2016, 38(2): 230-234. DOI: 10.13374/j.issn2095-9389.2016.02.011
Abstract PDF
Effect of low-temperature salt bath nitriding on the corrosion and wear resistance of Custom 465
FU Hang-tao, ZHANG Jin, WU Shuai, HUANG Jin-feng, GAO Wen, LIAN Yong
2016, 38(2): 235-240. DOI: 10.13374/j.issn2095-9389.2016.02.012
Abstract PDF
Microstructure and texture of Hi-B steel produced by TSCR process
XIAO Li-jun, WANG Hai-jun, XIANG Li, FU Bing, CHOU Sheng-tao
2016, 38(2): 241-247. DOI: 10.13374/j.issn2095-9389.2016.02.013
Abstract PDF
Fatigue behavior of powder metallurgy superalloy FGH97
NAI Qi-liang, DONG Jian-xin, ZHANG Mai-cang, ZHENG Lei, YAO Zhi-hao
2016, 38(2): 248-256. DOI: 10.13374/j.issn2095-9389.2016.02.014
Abstract PDF
Effect of process parameters on Si segregation in an aluminum alloy during squeeze casting
GUO Li-jun, XING Shu-ming, BAO Pei-wei, QIU Chang-ming, LIU Wen-xin
2016, 38(2): 257-262. DOI: 10.13374/j.issn2095-9389.2016.02.015
Abstract PDF
Microstructure evolution of the A380 aluminum alloy semi-solid slurry prepared by serpentine channel
LIU Zhi-yong, MAO Wei-min, WANG Wei-fan, ZHENG Zhi-kai
2016, 38(2): 263-269. DOI: 10.13374/j.issn2095-9389.2016.02.016
Abstract PDF
Preparation and properties of a mesoporous SBA-15/silica composited aerogel
PENG Chao-hao, YANG Mu, LUAN Yi, JIN Zhao-kui, TAN Xi
2016, 38(2): 270-275. DOI: 10.13374/j.issn2095-9389.2016.02.017
Abstract PDF
Finite element simulation of the temperature curve of wire rods during the whole process of rolling
DI Quan-kang, WANG Fu-ming, WANG Xiao-chen, YANG Zi-sen, DENG Su-huai, ZHENG Fu-yin
2016, 38(2): 276-282. DOI: 10.13374/j.issn2095-9389.2016.02.018
Abstract PDF
Virtual flux vector reconstruction of a PWM rectifier
CHEN Tie-zhu, ZHANG Yong-jun, XIAO Xiong, LUO Ling-bo
2016, 38(2): 283-290. DOI: 10.13374/j.issn2095-9389.2016.02.019
Abstract PDF
Reasonable spacing of parallel tunnels yield criterion based on the complex function theory and D-P
SONG Wei-chao, GAO Yong-tao, WU Shun-chuan, YAN Qiong, WU Qing-liang
2016, 38(2): 291-298. DOI: 10.13374/j.issn2095-9389.2016.02.020
Abstract PDF