column
Post-construction settlement and creep law of waste dumps
ZHANG Yuan-sheng, GAO Yong-tao, WU Shun-chuan, ZHANG Tai-bao, TIAN Shu-guang
2016, 38(6): 745-753. DOI: 10.13374/j.issn2095-9389.2016.06.001
Abstract PDF
Inhibition mechanism of iron mineral reduction in high iron type laterite nickel ore with the addition of sodium sulfate
GAO En-xia, LIU Zhi-guo, SUN Ti-chang, WANG Xiao-ping
2016, 38(6): 754-759. DOI: 10.13374/j.issn2095-9389.2016.06.002
Abstract PDF
Leaching kinetic of copper oxide ore containing carbonate gangue in the acid condition
WU Ai-xiang, HU Kai-jian, WANG Yi-ming, WANG Shao-yong, XU Heng
2016, 38(6): 760-766. DOI: 10.13374/j.issn2095-9389.2016.06.003
Abstract PDF
Electrochemical behavior of the super high strength aluminum alloy as a cathode in zinc electrodeposition
LI Tao, HUANG Hui, GUO Zhong-cheng
2016, 38(6): 767-772. DOI: 10.13374/j.issn2095-9389.2016.06.004
Abstract PDF
Distribution characteristic and formation process of bubbles in foaming slag in a converter
LI Xiang, BAO Yan-ping, WANG Min, LIN Lu
2016, 38(6): 773-779. DOI: 10.13374/j.issn2095-9389.2016.06.005
Abstract PDF
Formation mechanism of oversized DS-type inclusions in low oxygen special steel
JIANG Min, WANG Kun-peng, HOU Ze-wang, WANG Xin-hua
2016, 38(6): 780-786. DOI: 10.13374/j.issn2095-9389.2016.06.006
Abstract PDF
Comparison between the microstructures of M2 steel cast by the water-cooled copper mould and the sand mould
ZHAO Zhi-gang, CHOU Sheng-tao, ZHU Rong
2016, 38(6): 787-794. DOI: 10.13374/j.issn2095-9389.2016.06.007
Abstract PDF
Hot ductility and fracture mechanism of Fe-22Mn-0.7C TWIP steel
LAN Peng, TANG Hai-yan, JI Yuan, DU Chen-wei, ZHANG Jia-quan
2016, 38(6): 795-804. DOI: 10.13374/j.issn2095-9389.2016.06.008
Abstract PDF
Hot ductility and fracture mechanism of a Ti-bearing microalloyed steel
YANG Xiao-gang, ZHANG Li-feng, REN Ying, LI Shu-sen, LI Ming
2016, 38(6): 805-811. DOI: 10.13374/j.issn2095-9389.2016.06.009
Abstract PDF
Deformation and recrystallization texture features of medium temperature reheated grain oriented silicon steel containing copper
LIU Gong-tao, LI Hai-jiao, YANG Ping, MAO Wei-min
2016, 38(6): 812-819. DOI: 10.13374/j.issn2095-9389.2016.06.010
Abstract PDF
Effect of hot forming temperature on the microstructure and mechanical properties of high strength square tubes
PENG Xue-feng, HAN Jing-tao, YAN Pei-jie, WANG Yu
2016, 38(6): 820-826. DOI: 10.13374/j.issn2095-9389.2016.06.011
Abstract PDF
Indentation effect on the fatigue limit of axle steel
GAO Jie-wei, DAI Guang-ze, ZHAO Jun-wen, LI Heng-kui, XU Lei
2016, 38(6): 827-833. DOI: 10.13374/j.issn2095-9389.2016.06.012
Abstract PDF
Preparation of SiC/Al2O3 composite materials from coal fly ash
LI Zi-yong, WU Chun-han, YU Qing-chun, ZHOU Yue-zhen, LI Wei, YANG Bin
2016, 38(6): 834-840. DOI: 10.13374/j.issn2095-9389.2016.06.013
Abstract PDF
Analysis on the fracture failure in crack interaction of mortar using the phase-field method
HOU Yue, GE Zhi, ZHOU Jian, SUN Feng-yan, SUN Wen-juan
2016, 38(6): 841-846. DOI: 10.13374/j.issn2095-9389.2016.06.014
Abstract PDF
Molecular dynamics simulation of micro frictional contact characteristics between tires and asphalt pavement
SUN Feng-yan, HUANG Lu, WANG Lin-bing
2016, 38(6): 847-852. DOI: 10.13374/j.issn2095-9389.2016.06.015
Abstract PDF
Determination of low concentration naphthalene adsorption isotherms on SBA-15
LIU Ying-shu, JIANG Li-jun, LI Zi-yi, WANG Zhan-ying, YANG Xiong, YANG Quan
2016, 38(6): 853-860. DOI: 10.13374/j.issn2095-9389.2016.06.016
Abstract PDF
Online performance prediction of CCPP byproduct coal-gas system based on online sequential extreme learning machine
CHU Fei, YE Jun-feng, MA Xiao-ping, ZHANG Shu-ning, WU Qi
2016, 38(6): 861-866. DOI: 10.13374/j.issn2095-9389.2016.06.017
Abstract PDF
Manipulator dynamic modeling and motion planning for live working robot
JIANG Wei, WU Gong-ping, WANG Wei, ZHANG Jie
2016, 38(6): 867-875. DOI: 10.13374/j.issn2095-9389.2016.06.018
Abstract PDF
Extraction of blurred infrared targets based on a manifold regularized multiple-kernel model
YANG Dao, FU Dong-mei
2016, 38(6): 876-885. DOI: 10.13374/j.issn2095-9389.2016.06.019
Abstract PDF
Categorization and regression algorithm based on the quantitative association rule tree
WANG Ling, LI Shu-lin, WU Lu-lu
2016, 38(6): 886-892. DOI: 10.13374/j.issn2095-9389.2016.06.020
Abstract PDF