column
Research situation of the disaster-causing mechanism of tailing dams and its developing trend
LI Zhang-hong, BU Lei, CHEN Long-gen
2016, 38(8): 1039-1049. DOI: 10.13374/j.issn2095-9389.2016.08.001
Abstract PDF
Multi-field coupling numerical simulation heat accumulation zones in gob areas of the crossheading effect on oxidization and heat accumulation zones in gob areas
ZHANG Ying-hua, ZHOU Pei-ling, HUANG Zhi-an, GAO Yu-kun, YUAN Fei
2016, 38(8): 1050-1058. DOI: 10.13374/j.issn2095-9389.2016.08.002
Abstract PDF
Prediction of cemented backfill strength by ultrasonic pulse velocity and BP neural network
XU Miao-fei, GAO Yong-tao, JIN Ai-bing, ZHOU Yu, GUO Li-jie, LIU Guang-sheng
2016, 38(8): 1059-1068. DOI: 10.13374/j.issn2095-9389.2016.08.003
Abstract PDF
Application of a spiral pipe in a low stowing gradient backfilling pipeline and amendment of stowing gradient
MOU Hong-wei, LÜ Wen-sheng, YANG Peng
2016, 38(8): 1069-1074. DOI: 10.13374/j.issn2095-9389.2016.08.004
Abstract PDF
Ultrasonic velocity and acoustic emission properties of concrete eroded by sulfate and its damage mechanism
LIU Juan-hong, ZHAO Li, SONG Shao-min, JI Hong-guang
2016, 38(8): 1075-1081. DOI: 10.13374/j.issn2095-9389.2016.08.005
Abstract PDF
Desulfurization and denitration of sintering flue gas by blast furnace process
WEI Fu-hao, LIU Jian-hua, JI Yi-long, LI Kang-wei, LIU Hong-bo, LIU Jian
2016, 38(8): 1082-1090. DOI: 10.13374/j.issn2095-9389.2016.08.006
Abstract PDF
Computation method of gas-liquid interfacial area based on numerical simulation results
SONG Yan-po, LIU Zhi-gao, TAO Yan-ming, PENG Xiao-qi, CHEN Zhuo
2016, 38(8): 1091-1097. DOI: 10.13374/j.issn2095-9389.2016.08.007
Abstract PDF
Coupling numerical simulation of flow field,temperature field and stress field in a wide-thick slab continuous casting mold
HUANG Cheng, LI Xiao-qian, CHEN Ping-hu, XU Ting
2016, 38(8): 1098-1107. DOI: 10.13374/j.issn2095-9389.2016.08.008
Abstract PDF
Influence of vanadium on the microstructure refinement of high strength automobile beam steel
LI Yong-liang, WANG Fu-ming, LI Zhang-rong, YANG Zhan-bing, HE Yu-tian, ZHENG Ya-xu
2016, 38(8): 1108-1114. DOI: 10.13374/j.issn2095-9389.2016.08.009
Abstract PDF
Effect of TMCP on the microstructure and mechanical properties of Si-Mn series hainitic steel
LI Ming-bao, HU Shui-ping
2016, 38(8): 1115-1122. DOI: 10.13374/j.issn2095-9389.2016.08.010
Abstract PDF
Effect of Mg on the solidification structure and growth of the intermetallic layer of a Zn-11% Al alloy coating
LI Kai-liang, WU Zhang-jun, PENG Hao-ping, LIU Ya, SU Xu-ping, WANG Jian-hua
2016, 38(8): 1123-1131. DOI: 10.13374/j.issn2095-9389.2016.08.011
Abstract PDF
Effect of cooling rate on the microstructure and corrosion properties of Zn-5Al-0.1RE-xSi alloys
TU Hao, WEI Da-sheng, ZHOU Sheng-jie, LIU Ya, WU Zhang-jun, SU Xu-ping, WANG Jian-hua
2016, 38(8): 1132-1138. DOI: 10.13374/j.issn2095-9389.2016.08.012
Abstract PDF
Electrocatalytic performance of spherical NiO for ethanol oxidation
ZHAN Jing, LU Er-ju, CAI Meng, MA Ya-lin
2016, 38(8): 1139-1144. DOI: 10.13374/j.issn2095-9389.2016.08.013
Abstract PDF
Influence of Cr3C2 content on the wear properties of Cr3C2/Ni3Al composites
FU Li-hua, HAN Wei, XIE Yan-jun, LI Zhang-hai, DONG Chao-fang, ZHAO Lin, TIAN Zhi-ling
2016, 38(8): 1145-1152. DOI: 10.13374/j.issn2095-9389.2016.08.014
Abstract PDF
Compression behavior and energy-absorption characteristic of aluminum honeycomb material with polyurethane filler
SONG Yu-huan, XIAO Jiu-mei
2016, 38(8): 1153-1159. DOI: 10.13374/j.issn2095-9389.2016.08.015
Abstract PDF
Wall-thickness reduction of AP1000 primary coolant pipes subjected to cold roll-forming
WANG Peng, YANG Bin, WANG Sheng-long, ZHAO Tian-ming
2016, 38(8): 1160-1167. DOI: 10.13374/j.issn2095-9389.2016.08.016
Abstract PDF
Improving the wall thinning of the transition shoulder with anti-wedge upset rolling in cross wedge rolling hollow parts
YANG Cui-ping, ZHANG Kang-sheng, HU Zheng-huan
2016, 38(8): 1168-1174. DOI: 10.13374/j.issn2095-9389.2016.08.017
Abstract PDF
Numerical simulation of self-sustained oscillations in flow past a louver
ZHANG Yong-chang, XU Yu-gong, CHEN Xiang-dong, ZHU Yi-fei
2016, 38(8): 1175-1181. DOI: 10.13374/j.issn2095-9389.2016.08.018
Abstract PDF
Influence characteristics of the degree of flattening on the performance of double-P type radiant tubes studied by CFD simulation
FENG Jun-xiao, CHEN Yan-mei, LIU Xing-jie, WU Qi-ming
2016, 38(8): 1182-1189. DOI: 10.13374/j.issn2095-9389.2016.08.019
Abstract PDF
Scheduling method for dual-blade cluster tools with parallel chambers and reentrancy constraints
ZHOU Bing-hai, LI Ming, SU Yi
2016, 38(8): 1190-1195. DOI: 10.13374/j.issn2095-9389.2016.08.020
Abstract PDF