column
Comparison on the solid-state desilication kinetics of silicon manganese powder by microwave heating and conventional heating
MA Lei-lei, LIAN Fang, ZHANG Fan, DING Peng-chong, LIU Da-liang, CHEN Yan-bin
2017, 39(2): 167-174. DOI: 10.13374/j.issn2095-9389.2017.02.001
Abstract PDF
Analyses and calculation of point load strength on rock mass damage index
WEN Lei, LUO Zhou-quan, YANG Shi-jiao, WANG Wei, ZHENG Kai-huan
2017, 39(2): 175-181. DOI: 10.13374/j.issn2095-9389.2017.02.002
Abstract PDF
Numerical analysis of the failure modes and stability of 3D slopes with interbreeding of soft and hard rocks
YAO Wen-min, HU Bin, YU Hai-bing, LI Hua-zhou, HE Da-zhao
2017, 39(2): 182-189. DOI: 10.13374/j.issn2095-9389.2017.02.003
Abstract PDF
Influence mechanism and calculation model of CPB rheological parameters
LIU Xiao-hui, WU Ai-xiang, WANG Hong-jiang, WANG Yi-ming
2017, 39(2): 190-195. DOI: 10.13374/j.issn2095-9389.2017.02.004
Abstract PDF
Physical simulation and mechanism study of solid inclusion removed by liquid inclusions
NI Bing, NIE Hai-qi, ZHANG Tao
2017, 39(2): 196-201. DOI: 10.13374/j.issn2095-9389.2017.02.005
Abstract PDF
Damage mechanism of zirconia metering nozzles modified by Al2O3-ZrO2 composite powder
ZHAO Liang, XUE Qun-hu
2017, 39(2): 202-207. DOI: 10.13374/j.issn2095-9389.2017.02.006
Abstract PDF
Comparison on the solid-state desilication kinetics of silicon manganese powder by microwave heating and conventional heating
LIU Jian, LIU Jian-hua, WU Bo-wei, SHEN Shao-bo, YUAN Guo-hua, PENG Ling-zhi
2017, 39(2): 208-214. DOI: 10.13374/j.issn2095-9389.2017.02.007
Abstract PDF
Influence of MgO content on the thermo-physical properties of CaO-Al2O3-MgO-FexO-SiO2-K2O slags
HOU Peng-tao, WANG Li-jun, LIU Shi-yuan, ZHANG Jian-kun, CHOU Kuo-chih
2017, 39(2): 215-221. DOI: 10.13374/j.issn2095-9389.2017.02.008
Abstract PDF
Effect of Mn element on the microstructure and wear resistance of hypereutectic Al-22Si-2Fe-xMn alloys produced by inclined cooling
WANG Qiu-ping, LI Lu, ZHOU Rong-feng, JIANG Ye-hua, ZHOU Rong
2017, 39(2): 222-231. DOI: 10.13374/j.issn2095-9389.2017.02.009
Abstract PDF
Sulfurizing treatments on the surface of iron powder for preparing high density Fe-Cu-C alloys
YANG Fang, SUI Yan-li, GUO Zhi-meng, LI Pu-ming, YUAN Yong, LI Ping
2017, 39(2): 232-237. DOI: 10.13374/j.issn2095-9389.2017.02.010
Abstract PDF
Mechanism of ultrasonic field on the particle micro-agglomeration and interfacial bonding of SiCp/7085 composites
WANG Kun, ZHANG Li-hua, LI Zheng-hua, JIANG Wen, LI Chang-zi
2017, 39(2): 238-243. DOI: 10.13374/j.issn2095-9389.2017.02.011
Abstract PDF
Effect of Y-base rare earth on the microstructure and impact toughness of E36 steel plate
XI Xiao-jun, LAI Chao-bin, LI Jing-she, WANG Zhi-gang, SUN Le-fei, CHEN Ying-jun
2017, 39(2): 244-250. DOI: 10.13374/j.issn2095-9389.2017.02.012
Abstract PDF
Subsurface hooks in continuous casting slabs of low-carbon steel
ZHANG Xu-bin, ZHANG Li-feng, WANG Hao, WANG Sheng-dong, WANG Qiang-qiang, YANG Wen
2017, 39(2): 251-258. DOI: 10.13374/j.issn2095-9389.2017.02.013
Abstract PDF
Effects of temperature on the friction-wear properties of 40Cr steel by warm extrusion
LIU Wei, KONG De-jun, WU Kai, FAN Zhi-yuan
2017, 39(2): 259-266. DOI: 10.13374/j.issn2095-9389.2017.02.014
Abstract PDF
Effect of mandrel diameter on the wall thickness uniformity of the hollow valve of 5Cr21Mn9Ni4 by cross-wedge rolling
YAN Xiang-zhe, LIU Jin-ping, JI Hong-chao, WANG Bao-yu, ZHENG Zhen-hua, LI Zi
2017, 39(2): 267-275. DOI: 10.13374/j.issn2095-9389.2017.02.015
Abstract PDF
Burden distribution prediction model in a blast furnace with bell-less top
MA Cai-sheng, REN Ting-zhi
2017, 39(2): 276-282. DOI: 10.13374/j.issn2095-9389.2017.02.016
Abstract PDF
Effects of oxygen pipe-network pressure on the oxygen scheduling during blast furnace blow-down
ZHANG Pei-kun, WANG Li
2017, 39(2): 283-293. DOI: 10.13374/j.issn2095-9389.2017.02.017
Abstract PDF
Study and application of the slab camber control model in rough rolling
WANG Hai-yu, YANG Quan, WANG Xiao-chen
2017, 39(2): 294-300. DOI: 10.13374/j.issn2095-9389.2017.02.018
Abstract PDF
Influence of polymer coating dimension variation on the resonant frequency of polymer quartz piezoelectric crystal sensors based on ANSYS
WANG Nan-fei, LI Qiang, GU Yu
2017, 39(2): 301-308. DOI: 10.13374/j.issn2095-9389.2017.02.019
Abstract PDF
Deployment model of three-layer heterogeneous cellular networks based on Poisson clustered process
MA Zhong-gui, LIU Li-yu, YAN Wen-bo, LI Ying-ying
2017, 39(2): 309-316. DOI: 10.13374/j.issn2095-9389.2017.02.020
Abstract PDF