• 《工程索引》(EI)刊源期刊
  • Scopus
  • 中文核心期刊
  • 中国科学引文数据库来源期刊

差动调速小型连轧机组负荷分配的研究——小型轧机技术改造研究之一

苏逢西, 蒋金梅, 陶小同, 马晓平, 陈书文, 江树声, 王桂兴, 吴申, 苏逢荃

苏逢西, 蒋金梅, 陶小同, 马晓平, 陈书文, 江树声, 王桂兴, 吴申, 苏逢荃. 差动调速小型连轧机组负荷分配的研究——小型轧机技术改造研究之一[J]. 工程科学学报, 1983, 5(4): 76-88. DOI: 10.13374/j.issn1001-053x.1983.04.008
引用本文: 苏逢西, 蒋金梅, 陶小同, 马晓平, 陈书文, 江树声, 王桂兴, 吴申, 苏逢荃. 差动调速小型连轧机组负荷分配的研究——小型轧机技术改造研究之一[J]. 工程科学学报, 1983, 5(4): 76-88. DOI: 10.13374/j.issn1001-053x.1983.04.008
Su Fengxi, Jiang Jinmei, Tao Xiaotong, Ma Xiaoping, Chen Shuwen, Jiang Shusheng, Wang Guixing, Wu Shen, Su Fengquan. A study of Load Distribution of Semi-Continuous Bar Mill By Differential Dual Drive[J]. Chinese Journal of Engineering, 1983, 5(4): 76-88. DOI: 10.13374/j.issn1001-053x.1983.04.008
Citation: Su Fengxi, Jiang Jinmei, Tao Xiaotong, Ma Xiaoping, Chen Shuwen, Jiang Shusheng, Wang Guixing, Wu Shen, Su Fengquan. A study of Load Distribution of Semi-Continuous Bar Mill By Differential Dual Drive[J]. Chinese Journal of Engineering, 1983, 5(4): 76-88. DOI: 10.13374/j.issn1001-053x.1983.04.008

差动调速小型连轧机组负荷分配的研究——小型轧机技术改造研究之一

A study of Load Distribution of Semi-Continuous Bar Mill By Differential Dual Drive

  • 摘要: 本工作在分析φ250mm×6半连续小型轧机的综合测定试验资料的基础上,着重研究了它的负荷分布情况,明确了差速器损坏的主要原因,给出了强化差速器设计所必需的扭矩MB、功率N等负荷参数并建立了角钢连轧的能耗模型。
    Abstract: Baysed on the investigation of experimental data in the differential dual drive semi-continuous bar mill φ250mm×6, the following works have been studied:
    1,The D. D. D technique may be one effective way in reforming the old rolling mill in our country
    .2,The load parameters which are needed for reinforcing the machinery design of the differential case have been proposed.
    3,The rolling torqus and power mathematical model for steel angles have been proposed.
    It is denoted that the optimal roll pass design, the mill set-up system and the flow control system should be studied in order to further develop the continuous shape rolling technique.
计量
  • 文章访问数:  338
  • HTML全文浏览量:  92
  • PDF下载量:  19
  • 被引次数: 0
出版历程
  • 网络出版日期:  2021-11-14
  • 刊出日期:  1983-04-24

目录

    /

    返回文章
    返回