• 《工程索引》(EI)刊源期刊
  • Scopus
  • 中文核心期刊
  • 中国科学引文数据库来源期刊

直接合金化过程中锰氧化物与钢液的作用

黄务涤, 殷雁, 赵连刚, 赵玉华

黄务涤, 殷雁, 赵连刚, 赵玉华. 直接合金化过程中锰氧化物与钢液的作用[J]. 工程科学学报, 1988, 10(4): 407-411. DOI: 10.13374/j.issn1001-053x.1988.04.022
引用本文: 黄务涤, 殷雁, 赵连刚, 赵玉华. 直接合金化过程中锰氧化物与钢液的作用[J]. 工程科学学报, 1988, 10(4): 407-411. DOI: 10.13374/j.issn1001-053x.1988.04.022
Huang Wudi, Yin Yan, Zhao Liangang, Zhao Yuhua. Interaction between Manganese Oxide and Liquid Steel[J]. Chinese Journal of Engineering, 1988, 10(4): 407-411. DOI: 10.13374/j.issn1001-053x.1988.04.022
Citation: Huang Wudi, Yin Yan, Zhao Liangang, Zhao Yuhua. Interaction between Manganese Oxide and Liquid Steel[J]. Chinese Journal of Engineering, 1988, 10(4): 407-411. DOI: 10.13374/j.issn1001-053x.1988.04.022

直接合金化过程中锰氧化物与钢液的作用

Interaction between Manganese Oxide and Liquid Steel

  • 摘要: 本文研究了锰矿直接合金化过程中锰氧化物与钢液间的作用。碱度和钢中含硅量是影响还原反应的主要热力学因素,无论是FeSi还是SiC作还原剂,锰的还原速度均处于10-5mol Mn/s·cm2数量级。但SiC的溶入速度对还原过程有影响,反应5~15min基本趋于稳定,SiC作还原剂时,还原反应的表观反应级数开始为1,而后有所升高。
    Abstract: The interaction between Mn-bearing slag and steel during direct alloying with manganese ore is studied in presernt paper. Basicity and[Si] and/or[C] content are the main factors influencing the reaction. When using FeSi and SiC as reducing agents, the reduction rate of MnO is in 10-5 Mn/s·cm2 order. But the dessolving process of SiC has some effects on the reduction. After about 10 to 15 minutes,[Mn] tends to be stable. The rate order of SiC-MnO reaction is first order, then increases somewhat.
计量
  • 文章访问数:  408
  • HTML全文浏览量:  91
  • PDF下载量:  24
  • 被引次数: 0
出版历程
  • 收稿日期:  1987-12-16
  • 网络出版日期:  2021-11-14
  • 刊出日期:  1988-04-24

目录

    /

    返回文章
    返回