YA-TZP陶瓷材料的性能及在拉丝模的应用
Investigation On Microstructure of YA-TZP and Its Application for Wire Drawing Dies
-
摘要: 研究发现,YA-TZP陶瓷材料的性能取决于其显微结构。当临界晶粒度约为~0.7μm时,其最佳机械性能为σb=940-1010MPa,K1c=10.9 MPa√m,而且在250℃时效50h无中温强度衰减。还研究了ZrO2基体中不同相的形貌、显微裂纹以及第二相质点,并用透射电子显微镜发现了位错网和位错线。这种YA-TZP陶瓷材料用于拉丝模有良好的应用前景。Abstract: The properties of YA-TZP depend on its microstructures. Optimal combination of mechanical properties with σb =940~1010 MPa and K1c=10.9 MPa√m was obtained as the critical grain size~0,7μm. No strength degradation after aging at 250℃ for 50h. The morphology of different phases in ZrO2, the microcracks and particles of secondary phase wereinvestigated and dislocation networks and lines were found under TEM. Pre-liminary tests show good prospect on application for wire drawing dies.