• 《工程索引》(EI)刊源期刊
  • Scopus
  • 中文核心期刊
  • 中国科学引文数据库来源期刊

圆度测量的误差分离及数据处理

崔绍良, 钟家桢, 孙荣平, 宋涛

崔绍良, 钟家桢, 孙荣平, 宋涛. 圆度测量的误差分离及数据处理[J]. 工程科学学报, 1995, 17(6): 543-546,556. DOI: 10.13374/j.issn1001-053x.1995.06.010
引用本文: 崔绍良, 钟家桢, 孙荣平, 宋涛. 圆度测量的误差分离及数据处理[J]. 工程科学学报, 1995, 17(6): 543-546,556. DOI: 10.13374/j.issn1001-053x.1995.06.010
Cui Shaoliang, Zhong Jiazhen, Sun Rongping, Song Tao. Error Separation Technique and Data Processing in the Roundness Measuring[J]. Chinese Journal of Engineering, 1995, 17(6): 543-546,556. DOI: 10.13374/j.issn1001-053x.1995.06.010
Citation: Cui Shaoliang, Zhong Jiazhen, Sun Rongping, Song Tao. Error Separation Technique and Data Processing in the Roundness Measuring[J]. Chinese Journal of Engineering, 1995, 17(6): 543-546,556. DOI: 10.13374/j.issn1001-053x.1995.06.010

圆度测量的误差分离及数据处理

详细信息
    作者简介:

    崔绍良,男,59岁,副教授

  • 分类号: TG806;TP274.2

Error Separation Technique and Data Processing in the Roundness Measuring

  • 摘要: 详细推导出三测头误差分离原理用于测量工件圆度误差的数学公式;论述用滑动平均法和数字滤波法对采样数据作处理,可有效地抑制干扰信号,提高信噪比;通过对比实验证明上述方法对提高测量精度有明显效果。
    Abstract: The mathematical formulas for roundness measurement has been descussed firstly based on the tri-probe error separation technique.Then the slideaverage method and digital filtering method employed in the data processing were discussed, these methods can effectiveoy control the interference signal and mise the signal/noise ratio.It is examined exeperimentally that the accuracy of roundness measurementcan be remarkablely improval with these methlods.
计量
  • 文章访问数: 
  • HTML全文浏览量: 
  • PDF下载量: 
  • 被引次数: 0
出版历程
  • 收稿日期:  1994-10-29
  • 网络出版日期:  2021-09-05
  • 刊出日期:  1995-06-24

目录

    /

    返回文章
    返回