辊轧成型工艺制备ZrO2/Al2O3复相陶瓷的性能及结构

Structure and Mechanical Properties of ZrO2 Toughened Al2O3 Ceramic

    摘要
  • 摘要: 采用辊轧工艺,制成了素坯密度较高的氧化锆增韧氧化铝复合陶瓷,并对其性能和结构分别进行了研究。利用多种粒径的粉体混合、多种增韧方式来设计复相陶瓷的显微结构,得到了最佳配比和最佳烧结工艺条件下的ZrO2/nmAl2O3/μmAl2O3复相陶瓷。此陶瓷在1550℃下烧结,得到优良的抗弯强度和断裂韧性。

     

    Abstract: Y2O3 stabilized ZrO2 toughened nanometer Al2O3,μmAl2O3 ceramic composites are obtained with a high-shear two-roll mill process.Their structure and mechanical properties are studied respectively.Further more,the microstructure of these ceramic composites was designed through mixing three grain-size powders.A fine ceramic composites of ZrO2/nmAl2O3/μmAl2O3 is obtained.This ceramic composites can be densified above 98% of theoretical at 1550℃.Its flexual strengh and toughness are fine.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回