• 《工程索引》(EI)刊源期刊
  • Scopus
  • 中文核心期刊
  • 中国科学引文数据库来源期刊

板带轧制过程温度场有限元模拟及影响因素分析(Ⅰ)

张鹏, 鹿守理, 高永生, 赵辉, 赵俊萍, 曹辉

张鹏, 鹿守理, 高永生, 赵辉, 赵俊萍, 曹辉. 板带轧制过程温度场有限元模拟及影响因素分析(Ⅰ)[J]. 工程科学学报, 1997, 19(5): 471-475. DOI: 10.13374/j.issn1001-053x.1997.05.012
引用本文: 张鹏, 鹿守理, 高永生, 赵辉, 赵俊萍, 曹辉. 板带轧制过程温度场有限元模拟及影响因素分析(Ⅰ)[J]. 工程科学学报, 1997, 19(5): 471-475. DOI: 10.13374/j.issn1001-053x.1997.05.012
Zhang Peng, Lu Shouli, Gao Yongsheng, Zhao Hui, Zhao Junping, Cao Hui. Prediction of Temperature Distribution during the Hot Rolling of Strip by FEM (I)[J]. Chinese Journal of Engineering, 1997, 19(5): 471-475. DOI: 10.13374/j.issn1001-053x.1997.05.012
Citation: Zhang Peng, Lu Shouli, Gao Yongsheng, Zhao Hui, Zhao Junping, Cao Hui. Prediction of Temperature Distribution during the Hot Rolling of Strip by FEM (I)[J]. Chinese Journal of Engineering, 1997, 19(5): 471-475. DOI: 10.13374/j.issn1001-053x.1997.05.012

板带轧制过程温度场有限元模拟及影响因素分析(Ⅰ)

基金项目: 

国家自然科学基金资助项目

详细信息
    作者简介:

    张鹏 男 26岁 博士生

  • 分类号: TG302

Prediction of Temperature Distribution during the Hot Rolling of Strip by FEM (I)

  • 摘要: 采用弹塑性大变形热力耦合有限元法研究了铝板温轧过程,侧重计算轧件厚向温度分布,并分析了接触热传导系数、轧件热物性参数(导热系数、比热、密度)对计算结果的影响,计算结果与实验结果比较吻合
    Abstract: The warm rolling of aluminum plate was studied with the aid of elastic-plastic and thermal-mechanical coupled FEM, particular attention was paid to predict the temperature distribution through the backness of rolled plate.The influences of contact heat transfer, coefficient heat material data (thermal conductivity, heat capability, density) on calculated result were analyzed. Comparison of the calculated results with those from experiment show good agreement.
计量
  • 文章访问数:  322
  • HTML全文浏览量:  78
  • PDF下载量:  16
  • 被引次数: 0
出版历程
  • 收稿日期:  1997-01-23
  • 网络出版日期:  2021-09-09
  • 刊出日期:  1997-05-24

目录

    /

    返回文章
    返回