• 《工程索引》(EI)刊源期刊
  • Scopus
  • 中文核心期刊
  • 中国科学引文数据库来源期刊

角钢成形过程三维有限元热力耦合模拟

阎军, 鹿守理, 陈希克

阎军, 鹿守理, 陈希克. 角钢成形过程三维有限元热力耦合模拟[J]. 工程科学学报, 1999, 21(5): 483-486. DOI: 10.13374/j.issn1001-053x.1999.05.046
引用本文: 阎军, 鹿守理, 陈希克. 角钢成形过程三维有限元热力耦合模拟[J]. 工程科学学报, 1999, 21(5): 483-486. DOI: 10.13374/j.issn1001-053x.1999.05.046
Yan Jun, Lu Shouli, Chen Xike. Simulation of Angle Steel Rolling with Three-Dimensional Coupled ThermoMechanical FEM[J]. Chinese Journal of Engineering, 1999, 21(5): 483-486. DOI: 10.13374/j.issn1001-053x.1999.05.046
Citation: Yan Jun, Lu Shouli, Chen Xike. Simulation of Angle Steel Rolling with Three-Dimensional Coupled ThermoMechanical FEM[J]. Chinese Journal of Engineering, 1999, 21(5): 483-486. DOI: 10.13374/j.issn1001-053x.1999.05.046

角钢成形过程三维有限元热力耦合模拟

详细信息
    作者简介:

    阎军 男,43岁,博士生

  • 分类号: TG335.4

Simulation of Angle Steel Rolling with Three-Dimensional Coupled ThermoMechanical FEM

  • 摘要: 应用MARC/autoforge商用有限元程序,采用大变形弹塑性有限元方法对角钢的轧制过程进行了三维有限元热力耦合模拟.对模拟过程中涉及到的变形、温度场和宽展等进行了分析和探讨,重点分析了角钢异形孔中轧件的变形和应力分布.数值模拟的结果和现场实际轧制的情况进行了对比,结果证明数值模拟结果与实际轧制情况相符合.
    Abstract: With the help of commercial finite element software MARC/Autoforge, angle steel rolling process using large strain elasto-plastic coupled thermo-mechanical finite element method was simulated. The problems of metal deformation, temperature field and spread were analysed and key point was placed to distribution of deformation and stress in rolling process. Simulation results compared with rolling practice which shows numerical simulation is good agreement with rolling practice.
计量
  • 文章访问数:  394
  • HTML全文浏览量:  120
  • PDF下载量:  14
  • 被引次数: 0
出版历程
  • 收稿日期:  1999-03-28
  • 网络出版日期:  2021-08-26
  • 刊出日期:  1999-05-24

目录

    /

    返回文章
    返回