• 《工程索引》(EI)刊源期刊
  • Scopus
  • 中文核心期刊
  • 中国科学引文数据库来源期刊

金属热变形时摩擦边界条件的确定

阎军, 鹿守理

阎军, 鹿守理. 金属热变形时摩擦边界条件的确定[J]. 工程科学学报, 1999, 21(6): 539-542,547. DOI: 10.13374/j.issn1001-053x.1999.06.008
引用本文: 阎军, 鹿守理. 金属热变形时摩擦边界条件的确定[J]. 工程科学学报, 1999, 21(6): 539-542,547. DOI: 10.13374/j.issn1001-053x.1999.06.008
Yan Jun, Lu Shouli. Study on Friction Boundary Condition in Metal Hot Deformation[J]. Chinese Journal of Engineering, 1999, 21(6): 539-542,547. DOI: 10.13374/j.issn1001-053x.1999.06.008
Citation: Yan Jun, Lu Shouli. Study on Friction Boundary Condition in Metal Hot Deformation[J]. Chinese Journal of Engineering, 1999, 21(6): 539-542,547. DOI: 10.13374/j.issn1001-053x.1999.06.008

金属热变形时摩擦边界条件的确定

详细信息
    作者简介:

    阎军 男,43岁,博士

  • 分类号: TF556.3

Study on Friction Boundary Condition in Metal Hot Deformation

  • 摘要: 通过圆环压缩的有限元模拟和实验的方法分析了金属在高温下变形时的摩擦边界条件,分析了摩擦因数的大小对环形件压缩时变形和应力的影响.通过模拟计算和实验确定了摩擦的变化规律和金属热变形时摩擦因数的取值范围.
    Abstract: The boundary condition of metal deformation at high temperature using experimental and FEM simulation method, and the effect of friction factor on deformation and stress of ring are studied during for-ming process. Through ring compress experiment and FEM simulation analysis, the regularity of friction can be determined and the range of friction factor in metal hot deformation can also be obtained. Maximum coulomb friction factor is around 0.4.
计量
  • 文章访问数:  391
  • HTML全文浏览量:  91
  • PDF下载量:  21
  • 被引次数: 0
出版历程
  • 收稿日期:  1999-03-28
  • 网络出版日期:  2021-08-26
  • 刊出日期:  1999-06-24

目录

    /

    返回文章
    返回