• 《工程索引》(EI)刊源期刊
  • Scopus
  • 中文核心期刊
  • 中国科学引文数据库来源期刊

考虑来料板形遗传影响的带钢平直度模型

张大志

张大志. 考虑来料板形遗传影响的带钢平直度模型[J]. 工程科学学报, 2002, 24(5): 541-543. DOI: 10.13374/j.issn1001-053x.2002.05.015
引用本文: 张大志. 考虑来料板形遗传影响的带钢平直度模型[J]. 工程科学学报, 2002, 24(5): 541-543. DOI: 10.13374/j.issn1001-053x.2002.05.015
ZHANG Dazhi. Strip Flatness Model Considering Heredity Influence of Entrance Strip Shape[J]. Chinese Journal of Engineering, 2002, 24(5): 541-543. DOI: 10.13374/j.issn1001-053x.2002.05.015
Citation: ZHANG Dazhi. Strip Flatness Model Considering Heredity Influence of Entrance Strip Shape[J]. Chinese Journal of Engineering, 2002, 24(5): 541-543. DOI: 10.13374/j.issn1001-053x.2002.05.015

考虑来料板形遗传影响的带钢平直度模型

详细信息
    作者简介:

    张大志 男,30岁,讲师,博士

  • 分类号: TG335.12

Strip Flatness Model Considering Heredity Influence of Entrance Strip Shape

  • 摘要: 根据轧制理论中的体积不变原理和平直度的基本定义,考虑来料板形的遗传影响,推导出了以入口和出口带钢相对凸度差表示的带钢平直度模型.该模型在连轧机参数优化设计和辊型配置优化设计系统中均得到应用,效果良好.
    Abstract: A flatness model expressed by the difference of entrance strip crown and exit strip crown is built based on the definition of flatness and the invariable cubage theory of strip rolling, and the entrance strip shape is also considered in the flatness model. The model was used in the rolling parameters optimal design system and the rolling shape optimal design system, and good results were obtained.
计量
  • 文章访问数:  290
  • HTML全文浏览量:  47
  • PDF下载量:  16
  • 被引次数: 0
出版历程
  • 收稿日期:  2001-05-20
  • 网络出版日期:  2021-08-25
  • 刊出日期:  2002-05-24

目录

    /

    返回文章
    返回