全氢罩式退火炉退火热过程的研究(Ⅰ)——数学模型及其实测验证

基金项目:

国家自然科学基金资助项目（No.50136020）

详细信息

Investigation on Annealing Thermal Process of HPH Furnace (I): Mathematical Model

1. Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;
2. Equipment Research Dept, Shanghai Baosteel Research Institute, Shanghai 201900, China

摘要: 分析了全氢罩式退火炉退火工艺过程的传热特点,建立了以板卷温度计算为核心的退火热过程数学模型,通过模拟计算得到了钢卷退火曲线,并与实测值进行了对比验证.结果表明,该数学模型合理、可靠.
- 全氢罩式退火炉 /
- 数学模型 /
- 传热
Abstract: The characteristics of heat transfer were discussed for annealing thermal processes in HPH furnace. A mathematical model was proposed to calculate the annealing curves of rolled coils. The caculated results were compared with experimental data. It is shown that the mathematical model is reasonable and reliable to the heat transfer for annealing thermal processes HPH furnance.
- HPH furnace /
- mathematical model /
- heat transfer

1.	刘宏民，于华鑫，王东城，张桐源. 整辊式板形仪通道耦合影响系数的标定计算模型. 重型机械. 2023(04): 18-23 . 百度学术
2.	刘宏民，于华鑫，王东城，宋明明，张帅，徐扬欢. 冷轧带钢板形测控技术的发展状况和关键问题. 钢铁. 2022(11): 22-32 . 百度学术
3.	白振华，张立更，崔熙颖，刘超智，李鹏. 冷轧薄板离线板形测量误差分析及其修正技术. 塑性工程学报. 2020(04): 164-169 . 百度学术