• 《工程索引》(EI)刊源期刊
  • Scopus
  • 中文核心期刊
  • 中国科学引文数据库来源期刊

张力计的辊高差对板形检测精度的影响

王向丽, 李谋渭, 张少军, 陈工, 边新孝

王向丽, 李谋渭, 张少军, 陈工, 边新孝. 张力计的辊高差对板形检测精度的影响[J]. 工程科学学报, 2010, 32(8): 1071-1077,1089. DOI: 10.13374/j.issn1001-053x.2010.08.033
引用本文: 王向丽, 李谋渭, 张少军, 陈工, 边新孝. 张力计的辊高差对板形检测精度的影响[J]. 工程科学学报, 2010, 32(8): 1071-1077,1089. DOI: 10.13374/j.issn1001-053x.2010.08.033
WANG Xiang-li, LI Mou-wei, ZHANG Shao-jun, CHEN Gong, BIAN Xin-xiao. Effect of the roller-height-difference of tensiometer loopers on the precision of flatness measurement[J]. Chinese Journal of Engineering, 2010, 32(8): 1071-1077,1089. DOI: 10.13374/j.issn1001-053x.2010.08.033
Citation: WANG Xiang-li, LI Mou-wei, ZHANG Shao-jun, CHEN Gong, BIAN Xin-xiao. Effect of the roller-height-difference of tensiometer loopers on the precision of flatness measurement[J]. Chinese Journal of Engineering, 2010, 32(8): 1071-1077,1089. DOI: 10.13374/j.issn1001-053x.2010.08.033

张力计的辊高差对板形检测精度的影响

详细信息
    作者简介:

    王向丽(1980-),女,博士研究生;李谋渭(1938-),男,教授,博士生导师,E-mail:limow@me.ustb.edu.cn

  • 分类号: TG333.7

Effect of the roller-height-difference of tensiometer loopers on the precision of flatness measurement

  • 摘要: 以一种工程应用的张力计为分析对象,建立了存在辊高差的张力计-带材三维有限元模型.以辊高差为基本变量,通过改变高低辊位置、带材厚度及带材平均张应力,得到了不同情况下辊高差导致的板形检测误差值及其分布规律.
    Abstract: This article took a tensiometer looper during hot rolling as the object of study. A three-dimensional finite element model was built for a tensiometer looper with roller-height-difference and a hot rolling strip. Considering roller-height-difference as a basic variable, the measurement error of flatness caused by roller-height-difference and its distribution rule under different situations were obtained by changing the arrangement of high and low rollers, the strip thickness, and the average tensile stress of the strip.
计量
  • 文章访问数:  280
  • HTML全文浏览量:  62
  • PDF下载量:  15
  • 被引次数: 0
出版历程
  • 收稿日期:  2009-10-13
  • 网络出版日期:  2021-08-08
  • 刊出日期:  2010-08-24

目录

    /

    返回文章
    返回