Ni-Fe-Cr基高温合金表面AICrN涂层制备及高温氧化性能

Preparation and high temperature oxidation of AlCrN coatings on the surfaces of Ni-Fe-Cr-based superalloys

  • 摘要: 采用阴极弧离子镀法在Ni-Fe-Cr基高温合金表面制备了AlCrN涂层.通过电子扫描电镜、能谱仪、X射线衍射仪和X射线光电子谱仪等分析了AlCrN涂层表面和界面的形貌、能谱、物相以及结合能谱,并进行了800和900℃高温氧化实验,研究了AlCrN涂层抗高温氧化性能及其机理.实验结果表明:AlCrN涂层主要成分为Al、Cr和N元素,添加Al元素后表现出较强的AlN择优取向;Al2p峰谱为Al—N和Al—O结合键,Cr2p峰谱为Cr—O和Cr—N结合键,N1s峰谱以Cr—N和Al—N的形态存在,另外含有少量的N—Cr—O和N—Al—O结合键;经过高温氧化后AlCrN涂层表面氧化物为Cr2O3,对高温合金基体有良好的保护作用.

     

    Abstract: An AlCrN coating was prepared on the surface of a Ni-Fe-Cr-based superalloy by cathodic arc ion plating. The morphology, energy spectra, phase composition, and binding energy of the coating surface and interface were analyzed by means of scanning electron microscopy, energy disperse spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The high temperature oxidation resistance and mechanism of the coating were studied by high temperature oxidation tests at 800 and 900℃. It is found that the coating is mainly composed of Al, Cr and N elements, showing strong preferred orientation of AlN after adding Al element. The peak spectrum of Al2p is Al-N and Al-O binds, the peak spectrum of Cr2p is Cr-O and Cr-N binds, and the peak spectrum of N1s is in the form of Cr-N and Al-N, also contains a small amount of N-Cr-O and N-Al-O bonds. The oxide in the coating surface is Cr2O3 after high temperature oxidation, which has good protective effect on the Ni-Fe-Cr-based superalloy.

     

/

返回文章
返回