Li Shiqi, Ma Tingwen, Li Xuema. On Application of A Mathematical Model of Square Billet Continuous Casting to Engineering[J]. Chinese Journal of Engineering, 1987, 9(4): 16-22. DOI: 10.13374/j.issn1001-053x.1987.04.003
Citation: Li Shiqi, Ma Tingwen, Li Xuema. On Application of A Mathematical Model of Square Billet Continuous Casting to Engineering[J]. Chinese Journal of Engineering, 1987, 9(4): 16-22. DOI: 10.13374/j.issn1001-053x.1987.04.003

On Application of A Mathematical Model of Square Billet Continuous Casting to Engineering

More Information
  • Received Date: July 25, 1986
  • Available Online: October 27, 2021
  • A mathematical model of two-dimensional unsteady solidification heat transfer has been developed to simulate the square billiet continuous casting.Due to the ratio of length to cross section of the billets is about 102, an integral on line is used to complate the simulation with a common computer (IBM-PC).As a result, application of this model to engineering has been made satisfactory.
  • Related Articles

    [1]WU Zhixiang, XIE Mowen, ZHANG Xiaoyong, ZHANG Lei, WANG Jianhui, CHEN Xin. Experimental study on damage identification of single structure plane dangerous rock masses based on constant micromotion[J]. Chinese Journal of Engineering, 2024, 46(4): 589-599. DOI: 10.13374/j.issn2095-9389.2023.03.12.002
    [2]QIAN Ling-yun, MA Teng-yun, AN Peng, JI Wan-ting, SUN Chao-yang. Damage and fracture behavior of a metal sheet under in-plane compression–shear deformation[J]. Chinese Journal of Engineering, 2021, 43(2): 263-272. DOI: 10.13374/j.issn2095-9389.2020.09.23.002
    [3]DU Yan, ZHENG Xiao-ting, XIE Mo-wen, JIANG Yu-jing, LIU Qiu-qiang. Strength weakening characteristic of rock burst structural planes[J]. Chinese Journal of Engineering, 2018, 40(3): 269-275. DOI: 10.13374/j.issn2095-9389.2018.03.002
    [4]ZHANG Yi-fang, YAN Xiao-qiang, LING Qi-hui. Research on oscillation of neutral angle in deformation zone caused by vertical-torsional coupling vibration for tandem mill[J]. Chinese Journal of Engineering, 2015, 37(S1): 98-102. DOI: 10.13374/j.issn2095-9389.2015.s1.016
    [5]HU Fu-sheng, WANG Bao-yu, HU Zheng-huan. FEM analysis on the metal flow rule of cross wedge rolling cam shafts[J]. Chinese Journal of Engineering, 2010, 32(6): 797-801. DOI: 10.13374/j.issn1001-053x.2010.06.016
    [6]ZHAO Zhi-yi, QI Xiu-mei, SU Hui-chao, REN Xue-ping. Finite element analysis of metal flow during tube continuous rolling by a full float mandrel mill[J]. Chinese Journal of Engineering, 2010, 32(2): 183-190. DOI: 10.13374/j.issn1001-053x.2010.02.007
    [7]PAN Hongbo, TANG Di, HU Shuiping, WANG Xiaoxiao. Effect of friction on metallic rheology during plane strain compression[J]. Chinese Journal of Engineering, 2008, 30(11): 1266-1269,1281. DOI: 10.13374/j.issn1001-053x.2008.11.016
    [8]GAO Yintong, QIAN Dayi, GONG Min, SHI Jianjun. Research on optimal spacing of plane charge[J]. Chinese Journal of Engineering, 2005, 27(2): 129-131. DOI: 10.13374/j.issn1001-053x.2005.02.033
    [9]WANG Xin, WANG Zhangsong, YIN Zuoyong, TAO Dengkui, MA Guangting. Computer Simulation of Rolling for H Beam[J]. Chinese Journal of Engineering, 2003, 25(6): 560-562,567. DOI: 10.13374/j.issn1001-053x.2003.06.018
    [10]Wang Guilan, He Yuxin. Plane Stress Characteristics Method and Its Application[J]. Chinese Journal of Engineering, 1992, 14(2): 151-156. DOI: 10.13374/j.issn1001-053x.1992.02.007

Catalog

    Article Metrics

    Article views (340) PDF downloads (21) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return