Tang Qing, Yin Sheng, Yu Zhigang, Lai Heyi. A Study of SHS-Pressing Process of Ti-C-Ni-Mo System[J]. Chinese Journal of Engineering, 1993, 15(6): 572-575. DOI: 10.13374/j.issn1001-053x.1993.06.006
Citation: Tang Qing, Yin Sheng, Yu Zhigang, Lai Heyi. A Study of SHS-Pressing Process of Ti-C-Ni-Mo System[J]. Chinese Journal of Engineering, 1993, 15(6): 572-575. DOI: 10.13374/j.issn1001-053x.1993.06.006

A Study of SHS-Pressing Process of Ti-C-Ni-Mo System

More Information
  • Received Date: July 21, 1993
  • Available Online: October 17, 2021
  • Jn this work SHS-pressing process is studied. Concepts of compactable temperature minimum (Tp) and compactable time maximum (tp) are defined. A temperature-time-state diagram (TTSD) is presented. The upper limit of pressing time delay after combustion, τ, which is a control parameter of the SHS-pressing process, can be determined by tp-tc, where tc is combustion time. On the basis of the analysis, nearly full dense TiC-Ni-Mo alloy is synthesized.
  • Related Articles

    [1]WANG Jian, TIAN Wenhuai, LIU Xiaoping. Effect of Cu and Mo on the microstructure and properties of Ni-based alloy spray welding coatings[J]. Chinese Journal of Engineering, 2008, 30(10): 1139-1143. DOI: 10.13374/j.issn1001-053x.2008.10.015
    [2]LI Zhiwen, LIU Zhangsong, HUANG Jihua. Microstructure of TiC/Fe composite coatings prepared by reactive flame spraying[J]. Chinese Journal of Engineering, 2007, 29(6): 599-602. DOI: 10.13374/j.issn1001-053x.2007.06.034
    [3]LIU Huimin, HAO Bin, YANG Bin, ZHANG Jishan. Refinement mechanism of in-situ TiC particles on the microstructure of spray formed 7075 Al alloys[J]. Chinese Journal of Engineering, 2006, 28(4): 369-372. DOI: 10.13374/j.issn1001-053x.2006.04.014
    [4]LIU Huimin, WANG Hongbin, YANG Bin, HE Jianping, ZHANG Jishan. Effect of In-situ TiC Particles on Microstructure of Spray-deposited 7075 Alloy[J]. Chinese Journal of Engineering, 2003, 25(4): 337-340. DOI: 10.13374/j.issn1001-053x.2003.04.012
    [5]LIN Junpin, ZHONG Taibin, WANG Yanli, LIN Zhi, CHEN Guoliang. Effect of Ni Content on the Microstructures of Fe3Si Based Alloy[J]. Chinese Journal of Engineering, 2001, 23(6): 514-518. DOI: 10.13374/j.issn1001-053x.2001.06.009
    [6]YANG Bin, WANG Feng, HUANG Zanjun, DUAN Xianjin, ZHANG Jishan. Effect of in situ TiC Particulate on the Microstructure of Spray Deposited Al-20Si-5Fe Alloy[J]. Chinese Journal of Engineering, 2001, 23(1): 24-27. DOI: 10.13374/j.issn1001-053x.2001.01.033
    [7]HUANG Jihua, ZHANG Lichun, GUI Xiaofeng. Sintering.Behavior of Tungsten Heavy Alloys with High Ni/Fe Ratios[J]. Chinese Journal of Engineering, 2000, 22(2): 149-152. DOI: 10.13374/j.issn1001-053x.2000.02.015
    [8]Yin Sheng, Miao Shuxia, Liao Xiangwei, Lai Heyi, Wang Run. Preparation of TiC/Ni Functionally Gradient Materials by SHS-Pressing[J]. Chinese Journal of Engineering, 1993, 15(1): 99-103. DOI: 10.13374/j.issn1001-053x.1993.01.018
    [9]Luo Jingyuan, Wang Mingsheng. Corrosion Behavior of Amorphous Fe-Ni-P Alloy Plating Foils[J]. Chinese Journal of Engineering, 1991, 13(3): 281-285. DOI: 10.13374/j.issn1001-053x.1991.03.032
    [10]Sun Dongbo, Zhu Yingyang, Yang Dejun, Zhang Wenqi. Polarization Behaviour of Amorphous Ni-P Alloys in NaOH Solution[J]. Chinese Journal of Engineering, 1990, 12(2): 97-101. DOI: 10.13374/j.issn1001-053x.1990.02.019

Catalog

    Article Metrics

    Article views (305) PDF downloads (15) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return