Ren Jun, Lu Shouci. Interaction and Corelation of Reagents in Flotation Systerm of Rare-earth Mineral[J]. Chinese Journal of Engineering, 1997, 19(5): 429-433. DOI: 10.13374/j.issn1001-053x.1997.05.003
Citation: Ren Jun, Lu Shouci. Interaction and Corelation of Reagents in Flotation Systerm of Rare-earth Mineral[J]. Chinese Journal of Engineering, 1997, 19(5): 429-433. DOI: 10.13374/j.issn1001-053x.1997.05.003

Interaction and Corelation of Reagents in Flotation Systerm of Rare-earth Mineral

More Information
  • Received Date: October 26, 1996
  • Available Online: September 09, 2021
  • The interaction of Na2SiO3, H205 and H102 reagents was studied with orthogonal regression methed, and a regression methematical model is yielded. It deals with the dosages of the three reagents as well as the grade (β) and the recovery rate (ε) of RE minerals in flotation system. The experiment results show that the order of the interaction of the reagents is as follows:H205-Na2SiO3>H205-H102>Na2SiO3-H102.
  • Related Articles

    [1]LIU Bao-quan, ZHANG Hong, WANG Zi-dong, WANG Jun-sheng, ZHANG Yan. Theoretical research and application of the asymmetrical bending of work rolls for shape control in a cold rolling mill[J]. Chinese Journal of Engineering, 2012, 34(2): 184-189. DOI: 10.13374/j.issn1001-053x.2012.02.009
    [2]YANG Guang-hui, ZHANG Jie, ZHOU Yi-zhong, WANG An-su, ZHU Xin-yu. Work roll non-uniform wear and shape control performance of the 2250 hot temper mill in WISCO[J]. Chinese Journal of Engineering, 2009, 31(8): 1051-1056. DOI: 10.13374/j.issn1001-053x.2009.08.014
    [3]HE Anrui, HUANG Tao, YANG Quan, CHEN Xianlin, ZHAO Lin. Development of integrated shape control technologies in hot strip mills[J]. Chinese Journal of Engineering, 2007, 29(5): 519-522. DOI: 10.13374/j.issn1001-053x.2007.05.017
    [4]LINGHU Kezhi, HE Anrui, YANG Quan, ZHAO Lin, GUO Xiaobo. Feedback-decoupling for a combined shape and gauge control system in hot strip rolling[J]. Chinese Journal of Engineering, 2007, 29(3): 338-341. DOI: 10.13374/j.issn1001-053x.2007.03.020
    [5]JIA Shenghui, CAO Jianguo, ZHANG Jie, YIN Xiaoqing, LU Haitao, YANG Guanghui. Effect of SmartCrown work roll wear contour pattern on controllability of profile and flatness in tandem cold rolling mills[J]. Chinese Journal of Engineering, 2006, 28(5): 468-470,480. DOI: 10.13374/j.issn1001-053x.2006.05.034
    [6]CAO Jianguo, ZHANG Jie, CHEN Xianlin, WEI Gangcheng, HUANG Siqing, XIN Weimin. Gain Scheduling Decoupling Control for the Combined Shape and Gauge Control System in Hot Strip Mills[J]. Chinese Journal of Engineering, 2003, 25(4): 358-361. DOI: 10.13374/j.issn1001-053x.2003.04.017
    [7]LI Xiaoyan, ZHANG Jie, CHEN Xianlin, ZHAO Xinming, JIA Shenghui, HUANG Tao. Wear of Rolls in Single-Stand Temper Mill and Its Effect on the Strip Shape[J]. Chinese Journal of Engineering, 2002, 24(3): 326-328. DOI: 10.13374/j.issn1001-053x.2002.03.067
    [8]CAO Jianguo, ZHANG Jie, CHEN Xianlin, WEI Gangcheng, YANG Jinan, HUANG Siqing. Variation Mechanism and Its Solution of Decoupling Technological Parameters for the Combined Shape and Gauge Control System in Hot Strip Mills[J]. Chinese Journal of Engineering, 2001, 23(5): 452-455. DOI: 10.13374/j.issn1001-053x.2001.05.018
    [9]ZHANG Qingdong, HUANG Lunwei, ZHOU Xiaomin. Comparative Study on Shape Control Technologies for Wide Strip Mills[J]. Chinese Journal of Engineering, 2000, 22(2): 177-181. DOI: 10.13374/j.issn1001-053x.2000.02.023
    [10]Yang Quan, Chen Xianlin. Target Model of the Automatic Shape Control on Cold Strip Mill[J]. Chinese Journal of Engineering, 1995, 17(3): 254-258. DOI: 10.13374/j.issn1001-053x.1995.03.011
  • Cited by

    Periodical cited type(7)

    1. 赵鸿波,王凤民,张福,迟臣焕,周振兴,张建良. 2600 m~3高炉炉缸侵蚀特征数值模拟. 中国冶金. 2023(06): 87-94 .
    2. 吕昌贺,常李,周海华,徐震,张建良. 沙钢3号高炉石墨碳护炉方式下的稳产措施. 炼铁. 2023(02): 5-8 .
    3. 陈立军,曲迎霞,孙国伟. 铁钢界面铁水温降碳析出利用研究. 宝钢技术. 2021(04): 14-18 .
    4. 谢仁金. 泉州闽光高炉铁水粘度影响因素的分析. 天津冶金. 2020(06): 14-18+21 .
    5. 焦克新,张建良,刘征建,王广伟. 高炉炉缸含钛保护层物相及TiC_(0.3)N_(0.7)形成机理. 工程科学学报. 2019(02): 190-198 . 本站查看
    6. 刘增强,张建良,焦克新,周云花,但家云. 高炉炉缸Ti(C, N)保护层及死料柱行为研究. 炼铁. 2019(03): 22-25 .
    7. 祝和利,马恒保,张建良,李昕,赵永安. 碳复合砖炉缸无“象脚状”侵蚀现象探究. 炼铁. 2019(05): 1-5 .

    Other cited types(3)

Catalog

    Article Metrics

    Article views (403) PDF downloads (23) Cited by(10)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return