YU Wei, CHEN Yulai, CHEN Yinli, LIAO Dongjun. On-line Thermomechanical Treatment Process for N-80 Grade Oil Casing[J]. Chinese Journal of Engineering, 2002, 24(6): 643-646. DOI: 10.13374/j.issn1001-053x.2002.06.016
Citation: YU Wei, CHEN Yulai, CHEN Yinli, LIAO Dongjun. On-line Thermomechanical Treatment Process for N-80 Grade Oil Casing[J]. Chinese Journal of Engineering, 2002, 24(6): 643-646. DOI: 10.13374/j.issn1001-053x.2002.06.016

On-line Thermomechanical Treatment Process for N-80 Grade Oil Casing

More Information
  • Received Date: September 20, 2001
  • Available Online: August 25, 2021
  • The study focuses on fulfilling the on-line thermomechanical treatment(OLTM) process by intermediate cooling, reheating and reduction rolling of rough tubes after mandrel rolling. The process is beneficial to high qualities and lower costing for seamless tubes. It is found that the austentic grain grade by OLTM is smaller 2.5-3 ASTM than that by direct sizing, the properties of 40Mn2V steel by OLTM are the longitudinal toughness Ak≥23J,σ0.5≥555Mpa, σb≥820Mpa, elongation δ5≥23%, matching the property demands ofAPI Standard about N80 grade oil casing. The vital factors of improving impact toughness are the degree of austenite decomposition during intermediate cooling and the proper reheating temperature.
  • Related Articles

    [1]ZHAO Kai, WANG Kuai-she, HAO Ya-xin, WANG Wen, XU Rui-qi. Microstructure and mechanical properties of friction stir processed IF steel[J]. Chinese Journal of Engineering, 2015, 37(12): 1575-1580. DOI: 10.13374/j.issn2095-9389.2015.12.007
    [2]CHENG Jun-ye, CHEN Yin-li, ZHAO Ai-min, DING Ran, WANG Ze-han, KUANG Shuang, JIANG Ying-hua. Microstructure and mechanical properties of 30SiMnCrB5 hot stamping steel[J]. Chinese Journal of Engineering, 2014, 36(10): 1299-1306. DOI: 10.13374/j.issn1001-053x.2014.10.004
    [3]CAO Ling-yong, CAI Yuan-hua, CUI Hua, ZHANG Ji-shan. Effect of Zn content on the microstructure and mechanical properties of A1MgSiCu alloys[J]. Chinese Journal of Engineering, 2013, 35(8): 1040-1045. DOI: 10.13374/j.issn1001-053x.2013.08.007
    [4]HU Ri-rong, CAI Qing-wu, WU Hui-bin, TANG Di. Heat treatment influence on the microstructure and mechanical properties of NM500 wear resistant steel[J]. Chinese Journal of Engineering, 2013, 35(8): 1015-1020. DOI: 10.13374/j.issn1001-053x.2013.08.008
    [5]REN Yong-qiang, XIE Zhen-jia, SHANG Cheng-jia. Microstructure regulation and mechanical properties of low-carbon multiphase steels[J]. Chinese Journal of Engineering, 2013, 35(5): 592-600. DOI: 10.13374/j.issn1001-053x.2013.05.007
    [6]DING Wei, GONG Zhi-hua, TANG Di, JIANG Hai-tao, WANG Bao-feng. Mechanical properties and microstructure of continuous annealing TRIP steel without Si[J]. Chinese Journal of Engineering, 2013, 35(3): 319-324. DOI: 10.13374/j.issn1001-053x.2013.03.008
    [7]RU Zhi-fang, SONG Xiao-yun, LI Yan. Effect of solution and aging treatments on the microstructure and mechanical properties of a Ni50Ti44Al6 alloy[J]. Chinese Journal of Engineering, 2012, 1(S1): 39-43. DOI: 10.13374/j.issn1001-053x.2012.s1.008
    [8]LUO Qing-hong, LOU Yan-zhi, LI Chun-zhi, LU Yong-hao. Preparation,microstructure and mechanical properties of Ti-B-N nanocomposite coatings[J]. Chinese Journal of Engineering, 2011, 33(8): 1001-1005. DOI: 10.13374/j.issn1001-053x.2011.08.002
    [9]ZHANG Yinghui, KANG Yonglin, YU Hao, LIU Xiao, FANG Yuan. Microstructure and mechanical properties of TRIP steel by TSCR process[J]. Chinese Journal of Engineering, 2005, 27(6): 688-691. DOI: 10.13374/j.issn1001-053x.2005.06.012
    [10]WANG Feng, YANG Bin, CUI Hua, DUAN Xianjin, ZHANG Jishan. Microstructure and Mechanical Properties of Spray Deposited Al-20Si-5Fe-3Cu-1Mg Alloy[J]. Chinese Journal of Engineering, 2000, 22(4): 324-327. DOI: 10.13374/j.issn1001-053x.2000.04.041

Catalog

    Article Metrics

    Article views (306) PDF downloads (12) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return